gaznshellz
Member
Hi guys newbie to the site here, So we picked up a LR3 from auction with no history and no key. We managed to get a key programmer who set up a new key which we was so thankful for as we thought yes we can finally start the Lanny. But that wasnt the case. E on the dash and the errors of Transmission fault gear changing unavailble, HDC Fault, Special programs off, also i think it said DSC turned off?? I have had it on the computer and thrown up lots of codes also i have the JLR SDD which shows most of the modules arnt responding.
We are at logger heads with whats wrong. We have took the TCM off and that was abit corroded so we have cleaned it, still nothing.
We have jumpered the starter relay and she starts fine and drives but in limp mode.
Just so confused on what this could be, fuel pump is fine, fuses are fine
Any help much appreciated.
We are at logger heads with whats wrong. We have took the TCM off and that was abit corroded so we have cleaned it, still nothing.
We have jumpered the starter relay and she starts fine and drives but in limp mode.
Just so confused on what this could be, fuel pump is fine, fuses are fine
Any help much appreciated.