Folks ... I have a leak somewhere around the pump. I have replaced the low pressure hose as it seemed to be leaking from there after I cleaned the area. Started almost overnight. It's still leaking. Seems to leak more when I shut the Disco 2 (2003) off and it sits for an hour or more. It's...
Folks ... I upgraded my H7 low beams with a 6500K HID kit from here ->http://www.cqlight.ca/ for 179.99 US. It took about a week & half to get here ... no tax or Duty. It was easy to install and required one hole on each side (23mm) to be drilled in the access cover for the lights. This was to...
Folks ... the engine is leaking oil down the passanger side and is spraying the whole bottom of the truck from the front diff to the rear. The efin dealer has been filling up the crankcase with 7 liters of oil at each oil change. The manual shows 5.8 required. Just had my last oil change done...
Folks ... I got tired of paying through the nose for poor wiper blades for my Disco 2. I found a link that told me that the D1 wiperarms will fit a D2.
So I went out and got a pair from the dealer at $16 CDN each!!!! and replaced the D2 arms.
With about a year in service I have had no...
As I was driving down the Don Valley Parkway (highway) and Eglington Ave E. (middle of the city, Toronto) and by the on ramp I noticed a car that was bobbing up and down like one would playing with the brakes. I was driving in the curb lane of a three way highway ... fastest way during rush hour...
Folks ... friday I pulled out of my parking space at the office underground and heard a clunk at the rear of the truck as I moved forward. Since then I find the truck "feels" like one of the tires is low on air. I checked the pressure and they are fine; 46 psi (Yokahama Geolander H/TS-052)...
Folks ... I have had a problem with the wipers on my 03 Disco and have found a solution to the streaks and poor cleaning. The D1 wiper arms fit the D2 with no issues. The spring is much stronger and you can use blades from any source.
I ordered two D1 wiper arms DKB102710 and a set of 18"...
Brake Rotor Screws: Update
Folks ... is the screw that holds the brake rotor's to the hub a special size, or can it be gotten anywhere? It seems my two front's are seized onto the hub and I will be heating them up to remove them. I will be at my friends aftermarket Porsche Car garage with his...
Folks ... I have a 2003 Disco SE-7 and want to install winter tires this year. I have 18 inch rims with the Geolanders's installed which I want to keep installed.
The question is ... what size "STEEL RIMS" should I use .. 16" or 18" (sized according to owners manual) and what are the...
Folks ... I keep reading about upgrading the plugs to Bosch. Well, I checked their site and they have no listing for a 2003 Disco. What plugs do you folks recommend?
Jaak Lepson
2003 SE-7 with 32,000 KMs on clock.
Folks ... a friend gave me a rear ladder for my 2003 Disco with no screws or self tapping plugs. Where can I get the mounting screws/plugs to mount it with?
Jaak
Since the weather here in Toronto has been poor, I have noticed that the wiper arms have a weak spring. It seems the blade is not getting enough pressure onto the windshield to clean properly. This was also confirmed by the dealer ... stated that that is stock.
Is there another source...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.