-
-
Disappointing visit to local JLR dealer parts dept. Told them I wanted a 2012 LR4 V8 gas MAP sensor. They came back with totally wrong... -
I think that is the code I was getting. I replaced the MAP sensor (twice, because I forgot I'd done it) with no luck. What fixed it...
-
Great write up with coolant sensor tip to boot. Thanks!!
-
Forgot to mention. While burping the air out of the cooling system I got a 'low coolant level' warning light on the dash, when the...
-
Hi all, I replaced my radiator at 220k km a couple of months back. Couldn't find much in the way of a write up online, so thought I...
-
MarcusTriton reacted to tfinn42's post in the thread LR4 and the dreaded timing chain issue with
Like.
Thanks for all the advice. I think Illkeep looking for an LR3. Id really love a Disco 2 also, but my oldest uses a wheelchair and the 3... -
don't mind the 3mm wide gap, it's a sawblade-scar :)
-
Air down to 20 psi just before the beach. Soft sand will be easy at that level. You can drive on tarmac at that level but keep below...
-
Outer Banks driver here - you can definitely do it without airing down but reducing pressure to 20 or even 18 makes for a much more...
-
I drove it in outer banks a few years ago . Followed the beach guidelines (I believe it said 20PSI) and it was a nice smooth ride and...
-
Where at? With stock size tires I’ve gone down to 18. Start around 25. Should go without saying you should drive extra easy that low on...
-
Thank you all, appreciate the feedback and advice!
-
Plenty of driving on sand experience from the army... you may not need to reduce the pressure in the tires. But -15 - 20% is what I...
-
I've been stuck in the sand (but not near salt water) and the right way to do it is to avoid sand that is too soft. If you are in soft...
-
Just make sure you wash it well when you get home to get rid of any salty sand up in the frame/wheel wells.
-
-
Loading…
-
Loading…
