powershift's latest activity
-
Imagine the xlifter as a piggyback to the oem system and that's all it is. I use the xlifter as a compliment to the oem modes as well... -
powershift replied to the thread Not so Smart Air Suspension -.I've been leveling the air mattress by shimming it to counter some inclines, but that is limited. The manual says that I can use the key...
-
powershift replied to the thread Buying Used LR4 versus Mercedes G550.Being stiffer doesn't negate big parts of the problem though. It wasn't me who was disparaging the design, but I can see how people...
-
powershift replied to the thread Not so Smart Air Suspension -.The xLifter looks attractive. 12.2" max of ground clearance up from 9.4". I could have used that extra height. I'm curious what the...
-
powershift replied to the thread Buying Used LR4 versus Mercedes G550.To each his own. Richard Hammond, the man with the biggest balls, best house, best wife, family, friends on Top Gear says the Defender...
-
powershift replied to the thread Electrical issue/starting.Use a volt meter and check power at the battery, fusebox, etc.
-
FWIW... Here's an online workshop manual for most cars. This one in particular has the 14' and up SC pages.
-
powershift replied to the thread Tracking down suspension leak.Fwiw, the part the dealer was offering LR044836 was #18 it looks like because #20 is the VOSS connector...
-
-
powershift replied to the thread Tracking down suspension leak.Yeah, was just posting about an O-ring discovery and that they don't need lube (wasn't sure lol) and they can lose their elasticity over...
-
If your going to pull the block, you may as well just get an O-ring kit for it and rebuild it. You are already 100% into it at that point.
-
The battery box/ abs pump sides? Yeah I removed both left and right 1/2 of the boxes. There's a seam through the bottom, you can just...
-
powershift replied to the thread Most popular injector puller?.Yeah, the battery box. It looks to clear up a bunch of space. A mechanic did my valve covers so I was curious how hard it was to gain...
-
powershift replied to the thread Tracking down suspension leak.Evidence shows that the fitting is not leaking because both L&R rear sides dropped together with the battery unplugged instead of just...
-
powershift replied to the thread Most popular injector puller?.How did you get to the valve cover bolts, does removing the box give you access to the bolts on the exterior parameter?
-
Welp....passenger side is swapped. No drama. 5-8 whacks of the slide pull and they all popped out. Drivers side is next up
