Recent content by seanfhaynes
-
S
LED conversion ....go or no go?
I was thinking about changing over the Headlights and fog lights . Is there a kit that is known to work without issues for the 2006 LR3?- seanfhaynes
- Thread
- Replies: 1
- Forum: LR3
-
S
Tranny Fault
Mine did that for a while then it started to throw codes for the Torque converter not/improperly locking/unlocking after about a month or so. I had tried the brake switch replacement as well. are you getting hard shifts when stopping/starting from a stop? Hopefully this repair fixes it.- seanfhaynes
- Post #4
- Forum: LR3
-
S
Tranny Fault
Sounds just like what was/is happening with mine. mine goes under the knife at the beginning of the month for the transmission module.- seanfhaynes
- Post #2
- Forum: LR3
-
S
Various modules and fault codes, hard shifing
133k 2007 4.4L v8 We don't have service history from the previous owner, Ill have to swap out the brake light switch and bulbs for good measure. I got a new battery (the original one was still in use but it did not make a difference) I ended up taking it to the shop as I figure anything...- seanfhaynes
- Post #3
- Forum: LR3
-
S
Various modules and fault codes, hard shifing
The Rover has been shifting hard coming to and from a stop, as well as throwing various fault codes with what seems like every module possible. Does anyone have any recommendations? I have heard that maybe it might be a bad battery but I do not want to just start throwing parts at it if...- seanfhaynes
- Thread
- Replies: 3
- Forum: LR3
-
S
06 LR3 Turn signal no noise
An update Just wanted to update the post to let everyone know that this fix worked. It took about an hour to take apart the dash and replace the speaker in the instrument cluster. I took the tip and ran an extended lead from the cluster so that If I wanted to change to a different speaker I...- seanfhaynes
- Post #4
- Forum: LR3
-
S
06 LR3 Turn signal no noise
Thanks for the info, now I've gotta check the other sounds and tear the dash apart to fix it.- seanfhaynes
- Post #3
- Forum: LR3
-
S
06 LR3 Turn signal no noise
When I use the turn signals there is no clicking noise anymore. The lights flash on the dash and on the outside as well but the indicator noise has stopped. Im not sure where to start troubleshooting for this as I would assume that if it is blinking outside that the relay is working. Any...- seanfhaynes
- Thread
- Replies: 4
- Forum: LR3
