Search results

  1. Land Rover Joe

    Finally finished, Bosch for Denso Infotainment Swap

    To pile on: what would you "recommend" doing......?
  2. Land Rover Joe

    Air Spring reseal kit (LR016412)

    Thanks @powershift - Yes, (all) the mud is slowly getting removed and things getting cleaned/repainted (give us time!) I was frankly surprised how much stuff has accumulated everywhere in this thing...there are a lot of nooks and crannies which you only see when everything gets torn out. So...
  3. Land Rover Joe

    Air Spring reseal kit (LR016412)

    There is no hardness calibration or setting like with oil struts. That said, what about the rest of the suspension? There are a lot of other components like links, sway bars, and bushings.
  4. Land Rover Joe

    Fuel Gauge Reading Off

    So in 2013 when the fuel level sensor was wacked I drove the truck until there was nothing left in the tank. I don't think the pump died but I wouldn't recommend it and we ultimately needed to replace the unit because of the level sensor. And yes, the fuel cools and lubricates the pump...
  5. Land Rover Joe

    LR4 Engine Firewall / Bulkhead Sound Deadening and Heat Insulation

    This is the "new and improved" dynamat extreme sound deaden-er and heat insulator matting installed on the bulkhead today.
  6. Land Rover Joe

    LR4 Engine Firewall / Bulkhead Sound Deadening and Heat Insulation

    Here is the bay looking at the bulkhead with the insulator removed as well as the actual insulation.
  7. Land Rover Joe

    LR4 Engine Firewall / Bulkhead Sound Deadening and Heat Insulation

    Waffle Square did place some sound deadening on the hood but not very much and he never followed-up with thoughts and conclusions.
  8. Land Rover Joe

    LR4 Engine Firewall / Bulkhead Sound Deadening and Heat Insulation

    Background. I am not happy with the factory insulation in the engine bay and along with looking at using Dynamat products for sound deadening and heat insulation in the interior of my LR4, I am exploring applications in the engine bay. In this case, we pulled out the old firewall insulating...
  9. Land Rover Joe

    LR4 Engine Firewall / Bulkhead Sound Deadening and Heat Insulation

    Tribe: Does anyone have any experience or knowledge to share in using products like Dynamat in the Engine Bay, such as on the bulkhead / firewall or under the hood?
  10. Land Rover Joe

    Head Removal

    Great advice and we have indeed been going crazy with the brushes, solvents, rust converter, and gloss black paint. What happened with your AC? We will be putting it all back together in a couple weeks..........................
  11. Land Rover Joe

    Head Removal

    You are most welcome @M32H32IS ! Keep us posted on how things proceed. Also, @scapistron has some excellent points and allude to my observation that this is more about the "journey" and not the destination. He is right that you need to have lots of paint and cleaning supplies readily...
  12. Land Rover Joe

    Air Spring reseal kit (LR016412)

    And another perspective for driver's side wheel well after rebuild and re-installation.
  13. Land Rover Joe

    Air Spring reseal kit (LR016412)

    The newly painted and refurbed struts on newly painted mounts.
  14. Land Rover Joe

    Air Spring reseal kit (LR016412)

    And the two struts after some more cleaning in preparation for painting and then installation of new hardware (with the kit that contains new o-ring seals, spacers, and a nut.)
  15. Land Rover Joe

    Air Spring reseal kit (LR016412)

    Here is the strut after initial cleaning (with wire brushes and some lubrication).
  16. Land Rover Joe

    Air Spring reseal kit (LR016412)

    The passenger side Front Air Strut before removal and then the mounts after removal. I was surprised how corroded everything was (but probably should not have been). This goes to show how much maintenance and servicing all these things need over time.
  17. Land Rover Joe

    Air Spring reseal kit (LR016412)

    @ John Higgins - great subject and I have just refurbished my front air struts with the kit available from Atlantic British -Air Suspension Strut Sealing Kit LR016412, Original Equipment By BWI, For Land Rover LR3, LR4, And Range Rover Sport. We haven't yet put everything back together and...
  18. Land Rover Joe

    Fuel Gauge Reading Off

    All new parts for the fuel tank (internal) rebuild........!
  19. Land Rover Joe

    Fuel Gauge Reading Off

    @Rover Range is right - 2 gallons isn't much in a tank that holds something like 22+ gallons. That said, I did have a failure of my fuel sending unit in late 2013 (which was very early on). For whatever reason, the gauge read more than a 1/4 tank higher than it was...causing a roadside "break...
  20. Land Rover Joe

    Door deadening

    Thanks for the great write up @Jimmy Brooks ! How do you like the install now? I am planning on doing some work like this so looking for any tips, tricks, and advice!
  21. Land Rover Joe

    Routing for stout wires from battery to back?

    Thanks!
  22. Land Rover Joe

    Rear lower hatch sound deadening?

    @jlach993 and Tribe, Has anyone gone forward with this? I ask because I am planning on a refurbishment of my tailgate as part of the great 2025 LR4 rebuild and was wondering if there were any lessons learned or advice. I know that Waffle Square serviced his LR3 some time ago and installed...
  23. Land Rover Joe

    AMK Suspension Compressor Replacement and Rebuild

    And a broken piston...which was welded back together but probably won't work so I am going to look for a replacement.
  24. Land Rover Joe

    AMK Suspension Compressor Replacement and Rebuild

    This is what the AMK piston looks like -
  25. Land Rover Joe

    AMK Suspension Compressor Replacement and Rebuild

    Here are some images of the compressor during tear down -

Latest posts

Members online

No members online now.
Total: 1,372 (members: 0, guests: 1,372)

Forum statistics

Threads
37,146
Posts
226,329
Members
31,263
Latest member
KyleK951

Share this page

Top