Search results
-
Dead Main Battery and air bag light/warning?
Low battery, especially that low, will cause any number of electrical gremlin issues. Just replace the battery, charge it up and run the engine, let it go for a couple days, and see if you continue to have problems. Chances are, all your error messages will go away as the computer resets...- Land Rover Joe
- Post #2
- Forum: LR4
-
Best online source form a oem timing chain kit?
Greetings @Tumbler I have recently rebuilt my engine on a 2010 LR4 (V8 5.0L) - photos below and work is still ongoing. We pulled the engine out (body on) and went all the way down to the oil pan. I mostly (but not entirely) used Atlantic British (OEM or better) parts such as the -...- Land Rover Joe
- Post #6
- Forum: LR4
-
LR4 Trailer Hitch Service / Rebuild
No shame there @scapistron - this is definitely not in the "great design" category Thanks @ftillier ! Very helpful -- Land Rover Joe
- Post #11
- Forum: LR4
-
Door deadening
Very Cool idea @powershift ! Thanks for your comments and this project would certainly deserve a threat on its own - I would like to see that in operation! Good luck and keep us posted! Thanks @scapistron ! Good idea and we will take a look at adding the dynamat for the heavy bumper /...- Land Rover Joe
- Post #27
- Forum: LR4
-
Opening the rear hatch
Tribe, I bought the kit from Land Rover Passion @Blueaz mentions above (mine below), and is in the video (below from powerfuluk) - https://www.landroverpassion.com/en/product/lrp-upper-tailgate-kit-for-discovery-l319/ This thread, one of the more recent, is related to similar issues such as...- Land Rover Joe
- Post #3
- Forum: LR4
-
Less intrusive auxillary switches?
@MellonRover , Great project and thanks for writing up and the photographs. What are you powering with your switches (or what are your plans)? Also, do you have more details on the bulkhead and wiring locations? I don't understand what we are looking at in the photograph at the bottom and...- Land Rover Joe
- Post #3
- Forum: LR4
-
Crazy to consider new engine in a 2016 LR4?
Dear @Rover Range Is that $10K purchase price for the reman, or did you rebuild the engine at your shop and that is cost of the shop labor?- Land Rover Joe
- Post #22
- Forum: LR4
-
Increased Performance
If the engine were the first thing to upgrade, the next would have to be the cooling system. Unfortunately, there don't seem to be any aftermarket upgrades out there, so anything done would be (I think) a one-off, custom job. There are a number of companies out there that do custom radiators...- Land Rover Joe
- Post #38
- Forum: LR4
-
Increased Performance
I think this is still a fun threat and things to think about, even though I recommended caution. Following up with your idea, if one were to through caution to the wind, are a few crazy ideas I have had over the years (and I am sure I am not alone). The first is power-train: the engine. I have...- Land Rover Joe
- Post #37
- Forum: LR4
-
How-To DIY: Replacing LR4 in-tank fuel pump
Looking for anyone's experience or insight with this fault and this problem - I think we have narrowed it down but am unsure. I am going to look around for a new "Fuel Sensor and Hanger" and we shall try, try again. Are there other things we should be looking for in and around there? @gsxr...- Land Rover Joe
- Post #11
- Forum: LR4
-
How-To DIY: Replacing LR4 in-tank fuel pump
Lesson Learned: the parts (which I sourced from Atlantic British) do NOT include the "Fuel Sensor and Hanger" which I assumed they had. Attached are photos from the moment we realized that we didn't have this part (and that was likely the source of the problem in the first place) and then...- Land Rover Joe
- Post #10
- Forum: LR4
-
How-To DIY: Replacing LR4 in-tank fuel pump
After putting everything back together again, we maintained the same issue as before (low fuel warning light), even after filling up the tank and driving around. So there is one thing....and we think we know what it is: Fuel Sender and Hanger Assembly Part Number: LR042974 Supersession(s)...- Land Rover Joe
- Post #9
- Forum: LR4
-
How-To DIY: Replacing LR4 in-tank fuel pump
This is somewhat related to the thread in - https://www.landroverworld.org/threads/fuel-related-issue-at-start-up.45858/page-3#post-254252 However, this issue seems to be clearly related to the fuel tank system. So, I went ahead an ordered everything to replace the inside of the fuel tank...- Land Rover Joe
- Post #8
- Forum: LR4
-
How-To DIY: Replacing LR4 in-tank fuel pump
Thanks @gsxr ! Great write-up and probably something we all need to think about as the trucks get older. So during my rebuild, we accidentally (unplanned) dropped the fuel tank and got the fuel tank empty warning lamp on our gauge cluster - attached (this is from today but it has been going...- Land Rover Joe
- Post #7
- Forum: LR4
-
How-To DIY: Replacing LR4 fuel system low pressure sensor
Thanks for the thread @gsxr! What was the problem you were trying to solve with replacing this sensor? I have some fuel system issues myself and attempting to narrow things down....- Land Rover Joe
- Post #14
- Forum: LR4
-
Air Spring reseal kit (LR016412)
Tribe, Following-up on this project (air strut refurb). I purchased the "Air Suspension Strut Sealing Kit LR016412, Original Equipment By BWI, For Land Rover LR3, LR4, And Range Rover Sport" from Atlantic British to refurbish all four struts - See...- Land Rover Joe
- Post #20
- Forum: LR4
-
Door deadening
Stage 2 for the inside of the doors (except the one which we will get to soon). What are we missing?- Land Rover Joe
- Post #24
- Forum: LR4
-
-
Door deadening
@powershift Any thoughts on your monitor upgrades (like carplay)? To the tribe, Any inputs or lessons learned for dynamat in doors (or on flooring and wall / body panels)? Does dynamat on the door cards (inside - metal facing) help? Sound deadening / heat transfer reduction ongoing... Doors...- Land Rover Joe
- Post #22
- Forum: LR4
-
LR4 Trailer Hitch Service / Rebuild
Will Do! And will report back....- Land Rover Joe
- Post #8
- Forum: LR4
-
LR4 Trailer Hitch Service / Rebuild
Thanks @Rover Range How do I access that pin when the hitch is on the truck?- Land Rover Joe
- Post #5
- Forum: LR4
-
LR4 Trailer Hitch Service / Rebuild
Neither will turn and we have attempted those two remedies (penetrating oil and "persuasion") for the past two months, to no avail....- Land Rover Joe
- Post #3
- Forum: LR4
-
LR4 Trailer Hitch Service / Rebuild
Tribe, My LR4 trailer hitch is stuck in the truck (the little key will not turn) and I cannot get the thing off. This hitch is the OEM, "Genuine Tow / Trailer Hitch LR040248, 2-Inch Receiver, Class 3, Quick-Release, For Land Rover LR3, LR4 And Range Rover Sport". Some internet research has...- Land Rover Joe
- Thread
- Replies: 27
- Forum: LR4
-
PCV refresh/replacement
Tribe, An update to everyone regarding my engine rebuild and PVC services. So I ordered two new valves from Atlantic British: PCV Valve Service Kit, LR133579, which included rubber diaphragm, plastic cap, and steel spring. See -...- Land Rover Joe
- Post #28
- Forum: LR4
-
LR4 Stainless Steel Brake Lines
Tribe, It has been quite some time since this thread (and the folks who have commented are no longer on this forum), but I am rebuilding my whole brake system (not include the actual steel lines running under the body as well as the master cylinder) as part of a major project this year. For the...- Land Rover Joe
- Post #11
- Forum: LR4
