Search results
-
Lower Front Control Arms - Replacement - DIY Video
Recorded on the 2016, but exactly the same on the 2013. I hope you find this useful! -
Control Arms
Unless you really want to mess around with new bushings to change how it rides, it's just not practical to press the bushings in and out. You would need to remove the arm and replace both both bushings and the ball joint. In my world it's just easier to replace the assembly. I have now done... -
Considering a Used LR4 Purchase - Engine/PowerTrain Reflashed 4 times ?
Ha, Ha! Ummm... yes??? Seriously love these vehicles.... -
LR4 Jacking and Supporting - Garage and Off Road - DIY Video
Passing on info from the manual and some sweet tricks I picked up along the way. Hope this is useful! -
2016 Air Suspension Compressor Replacement, System Leak Check and Height Calibration - DIY Video
New Video from the summer work on my daughters LR4. Hope this is useful! -
Considering a Used LR4 Purchase - Engine/PowerTrain Reflashed 4 times ?
Considering a 2015 LR4 located in Denver, vehicle now at 99K miles. CarFax shows engine/powertrain computer/module reprogrammed at 15K, 36K, 48K and 64K miles. Always done at a dealership and appears to be associated with routine maintenance - but ??? Is this a warning sign or is this a... -
lr4 360 cameras
I looked into this about a year ago (for my 2016) and I never found anyone who has actually completed this project. If you can figure this out please post! -
UPDATE - Gasoline Odor - Is This Dealership BS??
Well, dealership cannot locate any issues, and after it sits for a bit, I agree there is no gasoline odor, but one hint.... Gasoline smell is only immediately after filling it up.... After filling it up and poking around a bit I have determined it is the fuel tank. There is a drain hole in... -
UPDATE - Gasoline Odor - Is This Dealership BS??
PLEASE SKIP TO MY COMMENT (UPDATE) BELOW (8/19/22) Not much to go on so far and no time to work the issue. Leaving in 4 days to return truck and daughter to University. Good chance I will not see the vehicle again for 10+ months, and possibly significantly longer. But will have 2,000 miles to... -
sagging confirmed, now what?
I don't think it's critical that it's dead flat/level, but I defer to those with more experience. There shouldn't be any change in height at all, I suggest that perhaps the valve blocks need to be rebuilt - new o-rings. There are 3 valve blocks, main/center, front and rear, rebuild kits are... -
Would like to confirm a few details on 2015 SCV6 maintenance
Not sure if this is still needed, but here is my video from the 2016 V6 SC. I strongly suggest you complete the supercharger maintenance. The video is stupid long, but it has all the plumbing info you need. -
AC Not Blowing Cold...Sometimes
Mine is fine, and not sure this applies.... On the 2002 Nissan Maxima there is a thermostat in air plenum in the dash that gets corroded. After I replaced that thermostat the A/C improved markedly. Same somewhere in the Rover?? Are your cabin air filters in good condition? -
Why does this keep coming off
Agreed, you need new clips. I got mine at AB, they worked fine... -
Can you identify this electrical part?
Agreed, that looks like the connector from the windshield, there are 2 of these, one on each side. You can tell if the windshield is working by using your thermometer "gun" and by just touching the windshield - although you may need to wait until fall or winter depending on your location so... -
Quick Brake Change Tool Question
My small (5"?) Crescent wrench just barely fits.. -
LR4 air suspension stays up!
It has been a little while, but those voltages look good to me. I recall that there was a pattern like you are seeing, but I don't exactly recall it now... I doubt that it will matter, BUT.... Check the software that your system is running. (IIDTool) My 2016 (purchased used) was running... -
Name That Sound !
Just returned from a few weeks vacation. Any ideas on this sound?? Many Thanks! -
AMK Compressor rebuild/replace
I just replaced the AMK in our 2016 a few weeks ago. Vendor was AutoHaus AZ. The pump was something like $500 or so, very inexpensive and was a legitimate AMK. BUT, the relay sent they sent was NOT compatible with the vehicle, it physically did not fit, and after ALOT of dinking around, I... -
Name That Sound !
OK, finally finished the other projects and she is back on the road again. Here is the video. Opinions? Thanks! -
getting that damn eco/stop start light off on the IP
It's an Exide EK-151. You can purchase in the UK with the proper battery terminals and have it shipped - no problem. I purchased at Groves Batteries and was very pleased, there are also other vendors are also out there.. The install is super easy and fast - if you can change a light bulb you... -
Lower control arm bushing question
I would call that a dead bushing needing replacement. Drive 2-3 mph with foot on brake pedal but not pressing Brake hard Listen for a clunk coming from under you just in front of the seat If it clunks you need new bushings. I bet they were installed wrong - if they were tightened down without... -
RESOLVED - Air Suspension Fault After De-Pressurize - BIG GNARLY LEAK!
LR4 60K Miles 2016 Making short a long story... IID Tool for all changes Replaced the air suspension compressor - AMK for AMK and AMK software running - everything came back to life just fine - drove it around a bit - everything fine. More work... Up on jack stands - all 4 wheels. Re-did the... -
Current Brake Pad and Rotor Recommendations?
Anyone know how thick the new e-brake pads are? If I knew that I could judge wear rate... At 60K I have 4mm left. Thanks -
Name That Sound !
I will record a video, post to UTube and let you know when it's available. Thanks -
Name That Sound !
2016 LR4, 60K miles The sound is very reproducible, and only occurs under these conditions. 1. It is absolutely an A/C related sound, it turns off instantly if I turn off the A/C. 2. It needs to be at least 85F outside, the hotter it is, the more sound I get. 3. Needs to be at a constant...
