txfromwi
Latest activity Postings About
-
-
txfromwi replied to the thread How to: Supercharger Removal, Rear Crossover, and Passenger Valve Cover.Those clips are LR011221, about $2 each at Rover. As long as you are in there replace the PCV valves and rebuild the supercharger... -
txfromwi replied to the thread Rear view or Rearview Mirror Soft Buttons.Thanks, worked like a charm !
-
txfromwi replied to the thread Rear view or Rearview Mirror Soft Buttons.Skipping the backstory, but finally programming the garage door opener buttons on Red Rover that I picked up about a year ago. Followed...
-
txfromwi replied to the thread Front-end suspension rattle and banging is gone!.Well, if you are up for a long distance drive to get this done. I have had excellent service from the Rover dealership in Rochester NY...
-
txfromwi replied to the thread Front-end suspension rattle and banging is gone!.Working in a parking lot is never fun - cudo's for making that work! But since when are new tools a deterrent ?? New tools are one of...
-
txfromwi replied to the thread Front-end suspension rattle and banging is gone!.When I did the crossover pipes, I was amazed at how much grit and dirt accumulated on the engine, even way down "inside" around the oil...
-
txfromwi replied to the thread Front-end suspension rattle and banging is gone!.Did you personally do the rear crossover with your own hands? If so then you certainly can do all the other plumbing bits yourself as...
-
txfromwi replied to the thread 2013 LR4 with overheated engine...what would you pay.Never chase a vendor - never. If they want the work they will contact you with a legitimate bid. Not that I ever plan to do it myself...
-
txfromwi reacted to ktm525's post in the thread Current Brake Pad and Rotor Recommendations? with
Haha.
If your wheels go black in one day you have the proper pads. -
txfromwi replied to the thread What jack do you recommend to store in your trunk?.I have the OEM jack of course, but the jack I would actually use is a 2 ton bottle jack. It stores very nicely in it's plastic case in...
-
txfromwi replied to the thread Lug Nuts Will Not Budge.But in the end, over tight lug nuts are not the fault of the vehicle, they are the fault of some ***** with an air gun. The days of...
-
txfromwi replied to the thread Lug Nuts Will Not Budge.That happened on our 1992 Isuzu Trooper. I could not get them off even with an impact wrench. Dealership claimed that they were...
-
txfromwi replied to the thread Current Brake Pad and Rotor Recommendations?.Per above, the backer nut on the sliders is thin, I use a 6" crescent wrench, it j u s t fits. And that 21mm 12 point. I know I drive...
-
txfromwi replied to the thread Aluminum crossovers exist now! (maybe).Not to discourage, but please see my comments above about EuroAmp.
-
txfromwi reacted to djkaosone's post in the thread Any DIY tips out there on replacing a 2016 LR4 SCV6 Thermostat Housing? with Like.
Just do it the right way and it'll be way easier.
-
-
Loading…
-
Loading…
