Search results
-
For those who have other things to worry about other than crossover pipe failure/catastrophic overheating
On a side note - what would the collective think is the fail rate on the coolant level sensors (miles or years)? Should that be on the list of crossover pipe bits since it's a $25 part...- 16FujiDisco
- Post #10
- Forum: LR4
-
Coolant Leak, not holding vacuum
I vote OE as well. It's a cheap enough part to eat the cost and have peace of mind that it won't bite you in the a$$ and be more expensive a few thousand miles down the road. Having just done mine recently, I agree that it should sit flush easily and without question whether it seated all the way.- 16FujiDisco
- Post #13
- Forum: LR4
-
Oil in intake manifold
I think even a fully functioning pcv let's oil through. The pooling oil is just a result of oil vapor returning to liquid form once the engine cools down. I would guess that the amount that trapped (1-2 oz) is just a result of all the nooks and crannies in the supercharger plus the extra heat...- 16FujiDisco
- Post #6
- Forum: LR4
-
Lifted suspension/calibration issue
Service/Test - Suspension - Set Tight/Normal tolerance- 16FujiDisco
- Post #4
- Forum: LR4
-
Dark color website?
I'm usually logged in on my phone so I thought it was a mobile setting- 16FujiDisco
- Post #7
- Forum: LR4
-
Has anyone reflashed their 3.0SC V6 aka Tune?
@hickersb maybe it depends on what type vehicle you were used to previously. I came from a 2.0l Sentra and a 5.3l 4x4 Silverado; the fist few times I drove the LR4 it felt fast and spunky...then after a month, not so much. My inclination, just based on web searches and this forum, are that it...- 16FujiDisco
- Post #114
- Forum: LR4
-
Has anyone reflashed their 3.0SC V6 aka Tune?
Yea, probably so. I think the last time I saw it on sale was in December, but they may do other sales events. When it's on sale the pulley/tune run around $1,450 vs $1,940 regular price.- 16FujiDisco
- Post #109
- Forum: LR4
-
Has anyone reflashed their 3.0SC V6 aka Tune?
I'm still running the original snout/pulley/coupler. Will do the coupler/SC oil next time I have the lid off. May do the pulley too since it's pretty cheap and adds another 1.5 psi. Interested in the tranny tune but haven't heard any feedback either. If you time it right, VAP will put the...- 16FujiDisco
- Post #106
- Forum: LR4
-
Has anyone reflashed their 3.0SC V6 aka Tune?
Agreed I have been successful thus far .- 16FujiDisco
- Post #103
- Forum: LR4
-
Has anyone reflashed their 3.0SC V6 aka Tune?
I've done a little more investigating and have come to the point where I don't think the pump upgrade will work for the '16 stumpy pump. The previous years pump had a 2 prong electrical connector, where the '16 has a 3 prong connector . At least at this point I'm not jumping at re-doing...- 16FujiDisco
- Post #99
- Forum: LR4
-
Has anyone reflashed their 3.0SC V6 aka Tune?
I can confidently say that my '16 has the stumpy pump. I can't get a good look or feel to it, but looking from the passenger side between the fan and accessory drive, it does look short. From above I can see that it only has 3 screw points joining the hat and body; the slimmer bosch style has 6...- 16FujiDisco
- Post #97
- Forum: LR4
-
Has anyone reflashed their 3.0SC V6 aka Tune?
I'm going to check mine when I get home to see what I have. The new P/N shows fitment for 2.0L, 3.0L, 5.0L(SV Autobiography Dynamic) gas and diesel models, so I can't say whether its a downgrade or not. Also, I'm not sure that size is indicative of flow rate; maybe @Fuji4 has more insight on...- 16FujiDisco
- Post #95
- Forum: LR4
-
Has anyone reflashed their 3.0SC V6 aka Tune?
After doing some more digging, i've found that the aux pump pre-MY15 is different than the '16 MY. P/N for '16 is LR095160 and looks like , but prior years P/N is PEB500010 and looks like (which is the Bosch upgrade that @Fuji4 alluded to) I'll have to do a visual inspection to verify that my...- 16FujiDisco
- Post #86
- Forum: LR4
-
Has anyone reflashed their 3.0SC V6 aka Tune?
https://www.roverparts.com/engine-cooling/water-pumps/PEB500010/ This one appears to be the same p/n but a plug-n-play option?- 16FujiDisco
- Post #82
- Forum: LR4
-
Has anyone reflashed their 3.0SC V6 aka Tune?
@Fuji4 plug and play, or did you have to modify the electrical connections?- 16FujiDisco
- Post #79
- Forum: LR4
-
Has anyone reflashed their 3.0SC V6 aka Tune?
@Fuji4 do you have a link or anything to what you used? I'd be interested in doing this too- 16FujiDisco
- Post #77
- Forum: LR4
-
-
Has anyone reflashed their 3.0SC V6 aka Tune?
Yea, with the app I enter milage and gallons when I fill up. If you miss a fill-up entry, you check a box and it won't factor that in to the average mpg.- 16FujiDisco
- Post #76
- Forum: LR4
-
Has anyone reflashed their 3.0SC V6 aka Tune?
Slightly better. Prior to the tune I was getting 15.38 with 18 fill-ups for reference.- 16FujiDisco
- Post #75
- Forum: LR4
-
Has anyone reflashed their 3.0SC V6 aka Tune?
I would say assertive driving; not dogging it but not out for a Sunday cruise. Highway speeds are usually 80-84 Only other mod is K&N replacement filters.- 16FujiDisco
- Post #73
- Forum: LR4
-
Has anyone reflashed their 3.0SC V6 aka Tune?
Using the aCar/Fuelly app with stock size road tires (pirelli scorpion zero)- 16FujiDisco
- Post #70
- Forum: LR4
-
Enabling features with IIDTool
Do we have the ability to adjust transmission parameters? Like shift points, line pressure, shift speed; anything like that? Velocity AP has a tune for the ZF8HP70 transmission, but I would think we can make some adjustments without a special tune- 16FujiDisco
- Post #21
- Forum: LR4
-
Has anyone reflashed their 3.0SC V6 aka Tune?
Just wanted to throw out an update for reference; after having the pulley and tune for 8k miles now, I'm averaging 16.12 mpg with mostly city driving on 31 fill-ups.- 16FujiDisco
- Post #66
- Forum: LR4
-
-
Add Blind Spot Monitoring ? - 2016 LR4 HSE
My '16 HSE has blind spot monitoring already, are you sure it isn't just disabled on yours?- 16FujiDisco
- Post #2
- Forum: LR4
