Search results
-
T
strange PING
Hey ,guys. I am trying to avoid stealer as much as possible(even tried local indy shop, but that would require longer visit to locate this annoying ping) so first i will ask forum members, if this is something that you know about.Here is the issue: Every morning at cold start when I pull out... -
T
Sliders
Nathan,your answer is always appreciated,the only reason I ask those questions is because these sliders are not cheap and I always try to get "best of both worlds".I am leaning towards Opt.2 slims since tubes serve two purposes protection and anchoring points in case of pooling lr3 to one of... -
T
Sliders
Ken ,would you say that , it is easy to stand on them and load the roof with doors closed or should they be open for more secure step , i am trying to choose between stage 2 and 3 as they have steel plate under tubes providing additional foot slip protection if one occurs.It is hard to tell if... -
T
Mantec under bumper plate
Do you guys know if mantec non winch will interrupt somehow A-frame oem rubber bumper installation? -
T
Great Divide 4 Pictures
Wow ,that's why they call CO freedom state, beautiful pics and I am only 1900 miles away,always wanted to travel there ,but would need at least 2 weeks to fully enjoyed it .these vistas are one of the reasons that I bought lr3.well someday...someday -
T
WTB 255-55-19 Tires For LR3 HSE
I have 255/55/19 goodyear wranglers ,actually, five of them ,four with lots of thread left and fifth full size spare ,never used.I would have to dismount them and shipped them to you unlease you are near New Jersey.Make me an offer and I will sell them to you.PM me. -
T
Front lower control arm bushes worn? Video
If you are able to lift the car up enough to walk under her try to grab lower control arm and move back and forth you can easily tell if there is play or not.If it's worn ,wheel moves and knocks as well and if the wheel does not move ,well ,it is still good.For two months I was under the... -
T
Front lower control arm bushes worn? Video
Lower control arms assembly at indy shop 800 (parts and labor) also replaced inner tie rods(one badly worn) at the same time that is another 200p&l , since both need the alignment afterwords anyway.Alignment obviously extra. -
T
Front lower control arm bushes worn? Video
I have just replaced ( at 62.000 miles) front lower control arms at indy shop and it cost me ,since I am out of warranty, almost 800 $ (parts and labor) also replaced inner tie rods , one was badly worn, and that is another 220 plus aliment -
T
floorboards soaked, and I mean SOAKED
this is the object that I was talking about -
T
floorboards soaked, and I mean SOAKED
[/IMG] here is the object that I was talking about. -
T
floorboards soaked, and I mean SOAKED
So...after two gin and tonics ,off to taking down panels and headliner I went. Rubber lines on both ends were actually clean I flashed them with some air and water and they appeared to work properly put everything back together very carefully, since the air bags are located in the headliner... -
T
floorboards soaked, and I mean SOAKED
hi guys thanks for all that valuable info how to clip this tubes but my question is related to drying front passenger footwell.I would like to take out front passenger seat to gain access to larger area of completely soak carpet Do I need to disconnect battery before unplugging all wires and... -
T
Fading Plastic
I just bought Mcguiars Natural shine protectant and surprisingly works perfect on outside fenders.metal discolored railings and interior dash as well, my car looks like brand new LR3. -
T
Which Ladder Do You Like Best?
rover connection 330.00 not anymore,it is 370 + shipping. -
T
LR3 18'' Rim
which 10 spoke since there is a few Iwould be intrested for a spare if this is the one I am looking for.Please post.
