I don't replace the washer every oil change but if you wipe all the oil off the pan betcha dollars to doughnut the oil is migrating to this point. Probably leaking from the rocker covers, power steering pump, and everywhere else but not the plug.
Don't know if it is anything like a 95 I don't think so but.... You should have test that will test the pump and the diaphram. Ie: in a 95 undo ecu . Looking at the harness short pins 1 and ten with a fusible link and then tie pin 6 to ground with a fusible link and pin 7 to ground with fusible...
thanks 98 disco and joey., called and ordered the actuators. Don't understand why my email return did not work. Usually it will state that it was bogus. Oh well.
Haven't heard back from the company yet parts still back ordered. Must be on a slow boat from china. Hard to believe they are that inexpensive. Waiting.....
Radio asking for code because the battery power isn't nada. With a charged battery volt meter across it should read 12.6 volts. Less than this say 10 or 11 volts cell is dead. Jump starting vehicles with cell open is taking alot of power from donor vehicle and the open cell acts like a big...
I'm guessing I'm in the wrong business. I could retire really fast doing ball joint replacements at that price. Maybe I'm not following what you've written on this situation closely enough. If the lug nuts are centering well enough on the wheels and all and they are tight they shouldn't move...
Did it rain or did you wash the truck? If it rains or I wash my 95 discovery my carpet pass enger carpet gets wet. I wonder if it's because the vent filters on the firewall under the windshield shrunk and deteriorated. I think mine is dripping thru the vent system. Run water hose on the pass...
Well excuse me...., disco Mike I was talking of my keys that are prestine and the locksmith did get the code as he is bonded to make the copies geeeeeez.
Not sure if it's like a 95 discovery 1 but I did order and bought a blank from a lock smith shop quite a few years back. I use it every day as it isn't as bulky because it doesn't have the plastic on it. He had to order it as nothing in his shop was the right size.
Thanks a bunch!!!! I'm gonna order five of them and yeah Joey you should too it's nice to see some one helping you for a change as you've helped so many of us. Thanks again 98 disco.
Maddie
Check the oil if there is any in your spindle housings that is why my abs lite goes on or use to. If your using grease forget my suggestion I guess. Before I changed out my seals, rotors and greased the bearings the abs lite would shine indicating I was low on spindle housing oil fill the...
Yeah and absolutely never ever buy alternators nor any other parts( as far as I'm concerned) from world parts as they are junk. And please to remember an open is just as bad as short. Best alternator I've found was a bosch. And who cares about a warranty they're for people that buy junk. So...
Could be that the rebuild was short lived. If the battery or the circuit is going open that will fry an alternator as well. Check to make sure that all charging circuit connections are tight and that includes battery terminals. Best to replace the battery at the time the altenator is...
If you went 80 miles after the rebalancing and then it started shaking again I would be inclined to suspect the belts in the tires are bad or the wheels are not staying centered. What tires did you buy?
Wow now I know what II RC means I left a post asking about abbreviations in the chat. PS use petrolium jelly on those battery terminals. It keeps them from corrosion a little tip I learned from my rover manual . Make sure not to use oil!!! Petrolium jelly only!!!!!!
Good for you mike!!!! You should remember that you have a very capable machine. A 96 with low mileage. Not every one has one so you should take care of it. Plenty of things to do preventive maintenance wise.
the throttle positioning sensor code 17 was my trouble. Cleared it, nothing else came up. Started the truck and code didn't show up again. I'm just relieved it appears to be no big deal. and now I know how to read the codes. Heck it's cool the 95's have the reader right under the passenger...
Need help. Engine light came on in my 95 disco. Code reader is borrowed can't find connector . Looking under right fascia one connector taped to bundle has plastic end I took off. This connector is sqaured at ends. The Ob 2 reader I borrowed has angled end am I missing the location or is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.