When you complete the cutting of the hole, seat the foglights in the hole and the covers for placement.....
If I remember correctly the L on the lamps was for the Driver's side and the R is for the passenger side.
The hard part is done...now just fasten the lamps down and install the wire...
After, you have the circle marked you can begin cuting the sections out. Until the hole is completely cleared.....
This is the most important and the hardest step of the project!
hint...the hole that you cut will be slightly smaller than what you need it to be. Take the plastic outer ring and...
Once the bumper is removed mark your hole bounderaries from inside the bumper by making a cross with your dremmel. This will come in handy later in the project.
Now that the bounderaries are done, use the inside of the outer covers to mark the foglight holes on the bumper with a permenant marker.
First step is to remove the bumper...which I used the links below to do so.
Wheel Arch
http://www.disco3.co.uk/gallery/albums/userpics/10582/frontwheelarchtrimremoval.pdf
Bumper
http://www.disco3.co.uk/gallery/albums/userpics/10582/frontbumpercoverremoval.pdf
As I promised in the post I will cover how I install my OEM foglights in my 2006 non-foglight LR3.
Before I do, if you are not mechnically saavy, please do not attempt! My own opinion of this project is if I had to do it all over again..... I probably would have a body shop cut the holes, it...
Is there a way to overide the power seats only functioning when the key is in the ignition? Seems silly since i'm 6'2" and my wife is 5'2" it is a pain for me to crank the truck up outside and adjust the seat...and no I don't have the memory seats any help would be great!
I didn't go with the v500, because it seemed like a waste, if you are going to keep your factory radio...went with the kenwood kos a200...I use it for audio through the stereo for the overhead dvd, ipod video, and usb hard drive. It is basically a high-tech fm modulator...
I'm experiencing the same thing and think I have narrowed it down to the 3rd row....seats when they are down, I believe they are hitting the latch...when the raised it's just pure rattling!
right light: XBJ000080*
left light: XBJ000090*
light key: YUD501220PVJ*
wires pack: YMQ500762*
light fourniture right: DXB500041PCL*
light fourniture left: DXB500051PCL*
clips : DPL500010 (look for 6 units)
If anyone could help me find the parts that would be great!
can i order the parts from your dealership...or is it a place online that have all the parts...I looked at atlantic british and they only have the fog lamps....
Well, I was on my mission to add fog lights to my 06 LR3 bumper...I called the dealer to price out the parts and they told me since my truck did not come with the fog lights, I would never get it to work! Please say it ain't so...I was going off the part list below.
right light: XBJ000080*...
I use my Ipod and DVD for the RSE and my Kenwood Navi, but I have to use the usb when the pod gets low. I can watch at least 1 1/2 movies with out a charge on a 30gb video ipod.
Which fairing size should I get, 38" or 44"?
When I measure the truck with the rails it is roughly 44". But when I look on the web, it says for an LR3 that you use the 38".
I know I have read some folks using 43" fairings, I just want to make sure I get the best fit.
What are your...
Does anyone have pics that they can post???? Also is the wiring for the mirror a plug and play???
I have an 06 LR3 with the regular mirror and I am interested in upgrading!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.