Search results

  1. A

    Oil sump prime

    Update. Wouldve posted sooner, but site was down. I changed the oil and filter (K$N 3001) and drove a couple of hours. Changed oil and filter and repeated one more time. All is good. Clean oil, no startup issues for the last week or so. Just to clarify. The motor flush was added to the...
  2. A

    Oil sump prime

    I'll check around to see if there is anyone in town that does the flush. Wouldnt just changing the oil and filter several times do the trick? I like the sock trick too. Ill give that a try. Usually, prior to working on the truck I'll put some lotion on my hands. Makes the grime much...
  3. A

    Oil sump prime

    Mike, I'll check around town on that. Sergie, I have already gone to 10W40. Should I go lighter than that? We are expecting a light freeze tonight. I may go buy a case or two of cheap oil (10W40) and some filters and do an oil change every day for the next 3 or 4 days. Maybe that will clear...
  4. A

    Oil sump prime

    Before I dropped the pan to replaced the pickup, I ran some engine flush according to the instructions (idle for 5 min and change oil). I dont remember the brand, it was in a can. Drained the oil, dropped the pan, changed the pickup and replaced the oil with 20W50 and used a Mann Oil Filter...
  5. A

    Oil sump prime

    Another update to this thred. I am experiencing the low oil pressure again. It has been acting fine up until it started turning cold. Im going to try a different filter and if that doesnt do it, looks like a new front cover will be my next purchase.
  6. A

    Oil sump prime

    Sorry all, I forgot to post my results. When I pulled the old pickup off, there was no gasket whatsoever. No was there any lock washers or anything else. I have built many engines and I have always used lock washers along with loctite on the bolts holding the oil pump to the block. Not to...
  7. A

    Guess what I found in my oil pan

    Yep, the picture sucks. I couldnt get my digital camera to focus that close. Hopefully, once I get a new pickup tube I can see if it still runs ok. Just wanted to see if anyone knew what this might be.
  8. A

    Guess what I found in my oil pan

    Thanks Beemer. Montanablur, I was thinking it was that too. Actually, my first guess was a muffler bearing, but then I reasoned it down to the check valve in my turn signal fluid resevoir. Now, if I can figure a way to tell if its a crush spacer or a monkeys wedding ring... no wait that is a...
  9. A

    Guess what I found in my oil pan

    What in the world is this? I dropped the pan due to poor oil pressure upon startup. Found the pickup tube loose. So, while it was down and out, I cleaned out the pan. What a mess. And in the bottom was this metal sleeve that almost looks like some sort of dowel pin. Its about 1/4 in tall...
  10. A

    Oil sump prime

    Carl, I couldnt agree more! You wouldnt happen to remember if there is a O-ring between the block and pickup tube on these 98 4.0s?
  11. A

    Oil sump prime

    Just thought I would post an update. I finally was able to crawl under the truck and drop the oil pan. Its raining, and I live in an apartment complex, so no cover from the elements. Talk about a PITA. I sure miss my garage. At least its not snowing yet. Anyway, I got the pan down and...
  12. A

    Oil sump prime

    I went this morning to Advance Auto and picked up a K$N 3001 filter and it has improved the start up tremendously! There is still a few seconds of delay, so Im gonna drop the pan anyway, clean things up, and check pickup. I got a gasket on order from Nathan at Discount Rovers. Also got a...
  13. A

    Oil sump prime

    Dave, I just talked with another Disco owner in our club that said nearly the same thing. His was some gunk on the pickup screen. Since "Molly" has almost 80k, it might be a good idea to drop the pan anyway and clean things up. I'll order a gasket and report back soon. Thanks friends for all...
  14. A

    Oil sump prime

    Ill see if I can grab one of those filters and bump up to 20W50. Its still pretty warm here in KY. Now to see if I can find someone in town that sells the oil pan gaskets. Is there some special british brand I need to use or will Napa work? Carl, I really like the idea of a pre-oiler, could...
  15. A

    Oil sump prime

    Ive been running approx 6 qts 10W40 Castrol. Ive read where some are running much heavier in the summer. could this be a possible source of the problem? Thanks Sergei for the answer on the filter. This started during a WIX filter and is still doing it with an AC filter. Previously I was...
  16. A

    Oil Pressure on the D1

    Hey roverchick, did you resolve this problem? What was it?
  17. A

    Oil sump prime

    How are the oil pumps driven on the 98 4.0 engines? Sergei, what do you mean by anti-drain valve on a filter. I have been running Napa Gold filters until this problem creeped up yesteday. I used an AC Delco then.
  18. A

    Oil sump prime

    I am experiencing difficulties with oil pressure upon start up and I am thinking that somehow I may have lost prime in the oil sump. Upon start up, the engine sounds freakin awful for about 2-5 sec depending on how long it sits. Clattering, knocking, tapping, etc. The oil light remains on for...
  19. A

    Is it o.k......

    ditto that joey. give nathan a call at discount rovers. 502.876.8377. He'll set you up with the right sensor at the right price the first time.
  20. A

    Dash Light Delay

    Thanks guys and gals for the suggestions. I'll check the fuse box and then the light switch. As for the window, it was just the one and hasnt done it again. Maybe just a one timer. Thanks again for the help.
  21. A

    Dash Light Delay

    Everytime I turn the headlights on, it takes a minute or two before the dashlights come on. They used to come on together. In addition to this, the rear passenger window would not go up. But after a minute of constantly pushing the button it finally went up. Does anyone know if this might be...
  22. A

    Performance for the Discovery

    My $0.02 is that the K&N is pure BS, especially for an offroad vehicle. Get a NAPA or WIX filter and go. Change it when it needs changing. Im new to the LR arena, but I think the other ideas are on track... ignition system and headers are good realistic improvements to almost any vehicle. If...
  23. A

    Diff and Tcase service

    I was able to get the diffs done. Stupid easy! I didnt know they had drain plugs. I'll attempt the tcase this weekend. Thanks for the help and sorry for the stupid question.
  24. A

    Diff and Tcase service

    I will be attempting to change the diff and t-case fluids this week. I have never done this on a LR and was hoping I could get some advice. What oil? 90wt? Is there a gasket involved with the diffs? any other pointers?
  25. A

    Hotttt!!!!!!!!!

    Mike, your advice to be cautious with the MAF is excellent advice that should be followed religiously. It seems that there are millions of cleaners out there. Just go to Auto Zone, they dedicate an entire wall to the crap. Never, never, never use something that you are not familiar with...

Latest posts

Members online

Forum statistics

Threads
36,720
Posts
222,745
Members
30,890
Latest member
Besi
Top