Search results

  1. MellonRover

    Break in the MOST ring? Fiber optic interconnect

    Already on it Went to u pull yesterday and got the harness from radio to rear window area from an lr4 ( tore that thing apart, and dread having to do that on mine) made long jumper and short test lead. I get light after the chew spot, and the loop did nothing. So either something downstream of...
  2. MellonRover

    Break in the MOST ring? Fiber optic interconnect

    Anyone have experience repairing/splicing the most fiber connection? Center dash screen stuck on LR logo, no controls of audio/nav or backup camera. Thinking of using the brass splices you can buy online. Here is the terrible pic of the wire. Can see red light when truck wakes up. So that can't...
  3. MellonRover

    Everything about tires for LR4/ LR3 with 18" wheels

    Tuffant USA is phasing steelies out. If you are going to do it, you should pull the trigger. Defender "steelies" also are a direct fit. Some say their dealer was overstocked with takeoffs and sold them cheap.
  4. MellonRover

    Front propshaft / driveshaft replacement

    Thanks m32! Your video was very helpful. Just did front and rear propshafts.
  5. MellonRover

    Front driveshaft bolts went missing!! And an introduction

    So....update. Front driveshaft started clacking. Must have gotten junk in there. I packed as much grease in and buttoned up in situ. But that must not have been enough. What an annoyance that was to replace. Did rear too because...why not. ($105 in just bolts...)
  6. MellonRover

    Any tips for SYA kit strap routing

    Mine don't rub. Here's the best I could do for pics. My straps have a permanent "shape" to them now, if I recall there was a twist to add some tension and make them shape that way
  7. MellonRover

    AirDownGearUp SS1: Drawer, Kitchen, Storage and Sleeping Platform Systems for Land Rover LR4

    Very nice. What are weight capacities of the kitchen sections, seeing as there are no legs.
  8. MellonRover

    Everything about tires for LR4/ LR3 with 18" wheels

    265 70 18 with SYA kit. Skinny and more sidewall. 32.6" tire
  9. MellonRover

    Compomotive wheels bent?

    Outside edge + lift = too much positive camber.
  10. MellonRover

    H/K Logic7 system blown?

    Is the sub in the tailgate door working? They have been known to fail and that makes for follow tinny sound all around
  11. MellonRover

    I took the leap...

    Congrats, they are a big bang for your buck vehicle. Glad to hear the dealer was a great experience. Check that front and rear crossovers were done. Front is the easier one Welcome!
  12. MellonRover

    LR4 Fuel Issues after alternator fail

    I used a napa rebuilt in a pinch ( 4 hours from home) and mine threw code for secondary pump when alternator spiked. Same as you, stalled and wouldn't start. After about 30 min cool down, it acted normal. Replaced with new JLR alternator and no problems. Wonder if you are seeing similar. Where...
  13. MellonRover

    Jacking Options

    I got one of these on marketplace for $20. https://www.exploringoverland.com/overland-tech-travel/2020/8/15/pinnacle-product-the-land-rover-bottle-jack
  14. MellonRover

    V8 engine shuts off after 4 minutes, code P0627-00 (6C) Fuel pump A control circuit/open

    UGGG....sorry gixxer. Sounds defeating. But we love these trucks right. ...uhhh we do right.??...lol
  15. MellonRover

    New coolant/oil weak spot

    Something else, not the rear crossover?
  16. MellonRover

    2012 LR4 coolant leak

    Agreed. Have them do the crossovers. It's cheap insurance.
  17. MellonRover

    V8 engine shuts off after 4 minutes, code P0627-00 (6C) Fuel pump A control circuit/open

    Last week I had to get a tow after my alternator was overcharging and voltage spiked something and shut me down while driving downhill. It was code for secondary fuel pump voltage too high. p0232-24 fuel pump A secondary circuit high. General signal failure signal stays high. It would start, and...
  18. MellonRover

    Thermostat to water pump outlet connector

    Get the brass one. Much more durable. I found it on Amazon. Don't buy the cheapest though ( even though most are the same). There were reports of the really cheap ones being too small in diameter and not sealing. Piece may be floating around, but going to be hard to find it. Is it possible it...
  19. MellonRover

    Longevity and Investment

    265 65 18 and smaller will fit in stock location. I have 265 70 18 and they do not. But agree, 18's should be first step
  20. MellonRover

    can't get inspected.

    Same. I lucked out and during the trip to the lake (2hrs each way) it was ready. This was after 300 miles of everyday driving.
  21. MellonRover

    Sitting on the side of the road listening to a rodent chew my truck

    Hahaha..B-0-0M got sensored....stupid.
  22. MellonRover

    Sitting on the side of the road listening to a rodent chew my truck

    Thanks for the diagrams LT! So for those that following along https://www.landroverworld.org/threads/new-alternator-must-i-calibrate-in-gap-for-bms-also-rock-sliders-install-talk.45662/ I shoulda known it was that dang rebuilt alternator....well I kinda thought it was. With this misadventure I...
  23. MellonRover

    Sitting on the side of the road listening to a rodent chew my truck

    Where is best place to get wiring diagrams?
  24. MellonRover

    Sitting on the side of the road listening to a rodent chew my truck

    Gonna get the mint sacks, load up the kids air rifle, and adopt every cat at local SPCA!

Latest posts

Members online

Forum statistics

Threads
36,767
Posts
223,383
Members
30,922
Latest member
MrPete
Top