Search results

  1. f1racer328

    Lr4 Brakes

    I looked on Ferodos website and according to the parts catalog, I put rear LR3 brake pads on my LR4. At least I have the proper front brake pads on. I bought them from Amazon which I won’t be buying car parts from anymore, for the most part. Amazon says the front brake pads are rear brake...
  2. f1racer328

    Suspension Fault - C1A18-64

    Happy Thanksgiving from my Disco! I’ve been gifted this code. I’m going to pull apart the valve block near the reservoir and clean/inspect and go from there. Drove around this morning, went to the gym, and it threw the code in the parking lot during startup. Like others here I haven’t off...
  3. f1racer328

    Lr4 Brakes

    I'm running FDB1613 on the rears right now. I don't even think that is the correct part... FCPEuro also has FDB4105 and Ferodo's website says that fits our Discos. (2013 at least)
  4. f1racer328

    Lr4 Brakes

    Here’s some photos of my 2013 calipers. Not sure if there are any notable differences between these and the older ones, but I did realize that my brake pad clips don’t appear to fit correctly. Don’t mind the rotors. New ones are on the way. I’m sure these are way out of spec at this point.
  5. f1racer328

    2016 LR4: Parking Brake Fault Light (When EPB Not Engaged)

    You might need to clean your sunroof drains if it leaked after rain. Generally the water ends up in the passenger footwell. We’ve had a few nightmare posts here relating to water damage. That’s where I would start. Good luck.
  6. f1racer328

    Lr4 Brakes

    That's an interesting observation. I'm rotating my tires today so I'll post a photo of my calipers and see if we can find a difference. I'm due for brakes too, and was curious if I've been ordering the correct brake pads, which it looks like I have. I have been running the Ferodo pads, and...
  7. f1racer328

    Coolant Crossover Pipe Repair 5.0 V8

    Yup. It was a pain in the ass. It's difficult to remove if you don't disconnect the AC condenser and evacuate all of the refrigerant. It was easier getting my replacement in, but that was after I figured out how it was going to fit. I think there are a few threads here related to the replacement.
  8. f1racer328

    Coolant Crossover Pipe Repair 5.0 V8

    If you have OEM coolant (and maybe other brands too, not sure) it will glow pretty good under a UV flashlight. I had a very small leak from my radiator. Coolant never even hit the ground.
  9. f1racer328

    '13 LR4 headlight lens replacement

    If you want good info on baking headlights open, you’ll want to do some reading on the retrofit source forums.
  10. f1racer328

    LR4 brake issues

    How’s the condition of your brake calipers? I’ve noticed the caliper pins are somewhat temperamental if they aren’t cleaned and lubed. I’m on my 3rd set of pads and 80k miles on OEM rotors without any warping.
  11. f1racer328

    2015 LR4 Windshield Wipers

    You won't have any buildup. I've been running them for a while and have zero issues.
  12. f1racer328

    2015 LR4 Windshield Wipers

    Active windshield? What do you mean by smearing?
  13. f1racer328

    HD vs non-HD package LR4

    The rear locker engages if you accelerate hard from a stop. If you even wonder onto a dirt road with any amount of incline it’ll lock too.
  14. f1racer328

    2015 LR4 Windshield Wipers

    I think the silicone blades are the way to go. Brand probably doesn't matter a whole lot. I'm coming up on 2 years with mine and they still look and function like they're brand new.
  15. f1racer328

    HD vs non-HD package LR4

    On the 2014 and onward if you have the 2 speed transfer case you have the locking diff.
  16. f1racer328

    HD vs non-HD package LR4

    Never found a universal one that works either. The only useful one is JRL's Topix, but you have to pay for it now.
  17. f1racer328

    2015 LR4 Windshield Wipers

    Silicone blades are superior. I use PIAA wiper blades. https://www.piaa.com/sitech They're not exactly cheap but they do last longer. I live in Arizona and have had zero issues with the heat degrading blades, however I park in a garage 99% of the time.
  18. f1racer328

    Advice on peeling dash

    Should have just followed these design rules https://carsandbids.com/auctions/KdlmZzzp/1993-ford-e-150
  19. f1racer328

    Is this a failing crossover pipe?

    If you have a black light/uv lamp, you can see the coolant pretty easily. It glows bright orange. (The factory coolant at least)
  20. f1racer328

    Coolant Crossover Pipe Repair 5.0 V8

    How are you bleeding the cooling system? If you do the vacuum fill/bleed you can pressure test it before running the engine.
  21. f1racer328

    Interesting read on Diff fill capacities.

    replace the V8 with another V8 that has two cylinders capped off, oh and yeah lets supercharge it too.
  22. f1racer328

    Front Bull bar Lr4 2014

    You can, but none of this is factory as far as mounting goes.
  23. f1racer328

    Off-Road and/or Overland Terrain Conditions

    You could just send it with some recovery boards. Probably not the greatest idea if the ground is super soft.
  24. f1racer328

    Interesting read on Diff fill capacities.

    If you have a rear locking diff it’s also a different fluid type than the front diff. Another small thing to consider.
  25. f1racer328

    LR4 ECO with transmission fault

    You would need to have the codes read with a Land Rover specific or professional level diagnostic tool. The basic code readers won’t display the transmission codes. I saw your post looking for an Indy to check the car out. That’s probably the best approach. How old is the main battery on the...

Latest posts

Members online

Total: 328 (members: 4, guests: 324)

Forum statistics

Threads
36,767
Posts
223,383
Members
30,924
Latest member
00Jam

Share this page

Top