Search results
-
Anyone have any idea if this is a cause for concern? Suspension issue.
"21" L405 SV Autobiography Dynamic. Noticed the front left shock was lit up orange versus the others. Car is on a level surface in my garage with the engine running, wheels straight, nothing unusual. It was in access mode at the time. I raised the car to normal mode and to off-road mode and...- Daveykid
- Thread
- Replies: 1
- Forum: Range Rover
-
L405 rear end vibration like an out of balance wheel...but it's not
As a follow up from the engineers at JLR, they are aware of the problem that exists with the L405 body vibration at certain speeds but are unwilling to pursue it any further. It is operating within "spec". So there you have it folks. Great vehicle, just don't drive it between 73-85 without...- Daveykid
- Post #4
- Forum: Range Rover
-
L405 rear end vibration like an out of balance wheel...but it's not
I have no idea what they've considered (or haven't for that matter) but it's worth a shot at this point. If I used the truck for mostly city or short suburban driving you would never know. Unfortunately it gets a decent amount of highway "trip" time and it's almost annoying as the dealer...- Daveykid
- Post #3
- Forum: Range Rover
-
L405 rear end vibration like an out of balance wheel...but it's not
Hi guys, I have an issue that is driving me nuts. 2021 L405 SV Autobiography Dynamic Holyoke edition here. Has anyone had any issues with what feels like a rear wheel out of balance? Here's what we know so far and what we've done: Starts around 73mph and remains until 85ish. It's a pretty...- Daveykid
- Thread
- Replies: 3
- Forum: Range Rover
-
Metal coolant plumbing for LR4?
My neighbor (and drinking buddy) is the regional director here in the midwest of all the JLR dealers. Service and Parts mgrs all report up to him. As such, you'd be surprised the level of service I get when he greases the skids for me. :) -
Anyone care to admit this was them? Off the edge of a cliff and recovery from Matt's Offroad Recovery.
All good points. Yeah, I was thinking he fell from the same spot Matt found to be really tight for the wrecker, but maybe higher. -
Metal coolant plumbing for LR4?
Safe advice, yes. I stuck with OEM as well the last time I had it done but of course in my searching I found those. I even showed the LR dealer and they thought it would be a worthy alternative, offering to install them like they would the OEM parts. -
Anyone care to admit this was them? Off the edge of a cliff and recovery from Matt's Offroad Recovery.
I've been watching Matt since they were Winder Towing and it seems as though they used to do mostly simple recoveries. Over the years I think they've had to up their game in order to gain and keep more subs. Obviously things have gotten more dangerous but he always seems (to the untrained eye)... -
Metal coolant plumbing for LR4?
Have you seen these? I personally haven't used them but worth a try? https://www.rkxtech.com/collections/engine/products/rkx-upgraded-coolant-pipes-for-jaguar-land-rover-3-0l-5-0l-sc?variant=44378830045483 -
Anyone care to admit this was them? Off the edge of a cliff and recovery from Matt's Offroad Recovery.
Used to be he would stick Lizzy under there but no more! -
Anyone care to admit this was them? Off the edge of a cliff and recovery from Matt's Offroad Recovery.
Yes, I didn't even pay attention to the LR3/4. And I agree, built like a tank, but we all knew that. Matt made the comment about how heavy the truck was and one of the other guys said something like "7,000 lbs of British steel". Not quite, but I get it. -
Anyone care to admit this was them? Off the edge of a cliff and recovery from Matt's Offroad Recovery.
Saw this just pop up. Sad. -
-
-
The Quest for A Durable Front Crossover Pipe
Not sure if this was brought up earlier in this thread only because I don't feel like going through 11 pages of comments :) but the next time my crossover pipes need to be replaced my dealer said they would gladly replace them with these. I haven't done a ton of research on them since I just... -
Dual engine air intake channels
Diagram like what was provided in an earlier post by I believe the OP. -
Dual engine air intake channels
Does anyone know if this is essentially the same set up as the 3L SC V6? Or better yet, does anyone have a diagram of it? TIA! -
I think I have officially replaced every hose ever made for my LR4. Exhausting search for my latest leak.
Wouldn't you like to ask the design engineer? -
I think I have officially replaced every hose ever made for my LR4. Exhausting search for my latest leak.
It's funny and sad all at the same time Magal Engineering would show the Land Rover as a sort of badge of honor. Then again, they are probably designing the system as per the spec sheet. -
I think I have officially replaced every hose ever made for my LR4. Exhausting search for my latest leak.
I don't understand why it has to be so complex though. If the answer was "because it's so bulletproof" I might buy that...but it's not bulletproof. Quite the opposite. Is this just a case of over-engineering? -
I think I have officially replaced every hose ever made for my LR4. Exhausting search for my latest leak.
You are so spot on. There are so many parts that should be done that way but how else can you keep the aftermarket alive? All kidding aside so many parts are so poorly designed. -
I think I have officially replaced every hose ever made for my LR4. Exhausting search for my latest leak.
'15 LR4 and either through routine maintenance or necessity because it blew, I honestly can't think of any other coolant related hose that hasn't been replaced. The latest and I believe last (even according to my dealer) is this one. The hard ABS plastic section between the two large silicone... -
Upper fuse box
I used this site. https://fuse-box.info/land-rover/land-rover-discovery-4-lr4-2016-fuses
