Latest activity
-
MBought a used 2021 Defender 110X in January. We have had it to the dealer 2 times to attempt to get the InControl app to connect with...
-
-
Sstrally replied to the thread 2015 LR4 P0014 + P0024 Codes.Have you fix the issues? I have the same problem but even worst! 2016 LR4 3.0 SC with P0011, P0021, P0014, P0024. I replaced all...
-
I'd definitely avoid using ChatGPT as the only source of guidance. My company has an enterprise license and I would consider myself a... -
That is a clever caliper hanger. I used fence wire and looped around a bolt at the top of the strut and then down to the caliper. But...
-
Anyone have tips, tricks, and lessons from rebuilding brakes? I am presently working on a full rebuild (new pistons, pins, washers...
-
Cleaned and Painted front calipers getting ready for the rebuild
-
Old Pistons and hardware and then the new hardware going onto the calipers (I purchased almost all of the rebuild hardware from Lucky8).
-
RI am pretty old fashioned and like the paper copies too; that said, being old fashioned, the ChatGPT summary looks pretty good (and I...
-
RRendak reacted to powershift's post in the thread Troubleshooting coolant vacuum fill failure with
Like.
The way is to pressure test it and look for leaks. If you used the Land Rover brand coolant then get a black light and it will reflect... -
RRendak replied to the thread Troubleshooting coolant vacuum fill failure.So I did the pressure test like y’all recommended and it turns out that the top half of the OEM front crossover pipe I got has a...
-
Land Rover Joe reacted to scapistron's post in the thread LR4 Engine Firewall / Bulkhead Sound Deadening and Heat Insulation with Like.
Main problem with the factory insulation is mice like to use it for a nest. I don't think they're particularly interested in eating... -
Sscapistron replied to the thread LR4 Engine Firewall / Bulkhead Sound Deadening and Heat Insulation.Main problem with the factory insulation is mice like to use it for a nest. I don't think they're particularly interested in eating...
-
powershift replied to the thread Troubleshooting coolant vacuum fill failure.The way is to pressure test it and look for leaks. If you used the Land Rover brand coolant then get a black light and it will reflect... -
RRendak replied to the thread Cooling System/Crossover Pipe.I'd definitely avoid using ChatGPT as the only source of guidance. My company has an enterprise license and I would consider myself a...
-
RRendak replied to the thread Troubleshooting coolant vacuum fill failure.Well I took the whole damn thing apart this weekend. Checked the water pump (both O rings installed correctly), reseated the lower half...
