Latest activity
-
BBBLR3 replied to the thread Armrest cover replacement.I need to do this as well. Did you get replacement covers somewhere? Quality? Thanks!
-
powershift reacted to Land Rover Joe's post in the thread Write up: High Pressure Fuel Pump (HPFP) Replacement with
Like.
And a good video about the fuel system for the 5.0L V8 engine - -
That is a clever caliper hanger. I used fence wire and looped around a bolt at the top of the strut and then down to the caliper. But... -
powershift replied to the thread LR4 Calipers.That is a clever caliper hanger. I used fence wire and looped around a bolt at the top of the strut and then down to the caliper. But...
-
Land Rover Joe reacted to powershift's post in the thread Air Spring reseal kit (LR016412) with Like.
For the serviced struts, I would expect longevity issues vs new, but they may be fine too. I'd be interested in hearing back on how they...
-
Land Rover Joe replied to the thread LR4 Calipers.Experience, insights, and recommendations most welcome!
-
Land Rover Joe replied to the thread LR4 Calipers.Old Pistons and hardware and then the new hardware going onto the calipers (I purchased almost all of the rebuild hardware from Lucky8).
-
-
Land Rover Joe replied to the thread LR4 Calipers.Cleaned and Painted front calipers getting ready for the rebuild
-
-
powershift replied to the thread Air Spring reseal kit (LR016412).For the serviced struts, I would expect longevity issues vs new, but they may be fine too. I'd be interested in hearing back on how they...
-
Land Rover Joe replied to the thread LR4 Calipers.Anyone have tips, tricks, and lessons from rebuilding brakes? I am presently working on a full rebuild (new pistons, pins, washers...
-
-
Are there 2? Are they the same part numbers, or different part numbers if they are 2? Sorry, I don't have mine in the driveway right...
-
I finished replacing the pumps. Never want to do that again! Some tips for anyone who is going to do this: 1. Buy a pack of plastic...
-
Did the new pumps fix the problem?
-
Yes, it took a little while to crank on the first startup (I expected this because there was no fuel in the line) but it ran smooth from...
-
powershift replied to the thread SC V6 Overheat Spike at Highway Speeds.I'd replace the t-stat. I had mine done at 97k mi proactively.
