Search results

  1. Tapps33

    5.0 supercharged into an LR4?

    You are officially my hero! (Except the fact that I have all the modules you listed….except for the keyless receivers! [emoji2357]). May have to pull the trigger on a whole new set of modules! [emoji31] Sent from my iPhone using Tapatalk Pro
  2. Tapps33

    At Long Last... Modern head unit!

    @Stuart Barnes, what year model is your LR4? I was thinking of using one of those units, but could never tell if they'll work with the 2010 systems/componenets. Typically when I reached out to the sellers, their responses were along the lines of, "sure, it works with everything" But there...
  3. Tapps33

    At Long Last... Modern head unit!

    That looks really nice!! Plus it’ll help with the glare issue! Couple questions; do you have the updated or post 2010 version electronics or the later 2012 version? Then, my next question is are you able to access any of the original system functionality? Say for the off-road information...
  4. Tapps33

    5.0 supercharged into an LR4?

    Just to be clear, the ECU and other boxes all came from the same RRS. So technically....from a computer standpoint it is a RRS.....just sitting on an LR4 frame. The theory is that the other auxiliary modules are are identical between the different platforms, and are not VIN encoded. While I...
  5. Tapps33

    5.0 supercharged into an LR4?

    I know that for the early model SCV8 engines it’s a Bosch ECU. Then they switched it to a different manufacturer. FYI, the newer ECU is actually more tunable then the original Bosch. Hence why I called all the tuning shops and tried to get them to Re-write the ECU VIN encoding but they...
  6. Tapps33

    5.0 supercharged into an LR4?

    Actually, the 13-18 were all 6 cylinder supercharged engines. While the blocks are virtually identical externally, internally there is significantly more internal bracing and cooling within the block. Basically, they’ve created a V6 out of a V8 block. (Hopefully the pic posts and you can see...
  7. Tapps33

    5.0 supercharged into an LR4?

    Sorry, not yet...we ended up moving, so I’ve been doing that. Unfortunately, the new house doesn’t have a garage....so, I am going to have to find some garage space to rent as I’m at 170K and the engine is stating to rattle a little more than I’d like. I’ve got all the parts...
  8. Tapps33

    Faults - Brake module, emergency brake, brake pads, HDC offline, TSC offline

    Sounds like a comms bus error. We were just talking about something like this on another thread. The general consensus was that there’s probably a bad ground on either you high speed or medium speed comms bus module. I’m a bit rusty on the specific locations of the modules, but I’ll look it...
  9. Tapps33

    5.0 supercharged into an LR4?

    Well, bad news. The donor car I got most of the modules from us been scrapped. I’m trying to find another donor car, but most of the ones I come across on eBay simply say, “all we have is what’s posted.” I’m going to keep looking, but it’s beginning to look like the LR4 suspension will stay...
  10. Tapps33

    2010 LR4 Multimedia interface update/upgrade?

    Well, the company said they don’t support 2010-2011 models. Unfortunately, they didn’t provide any feedback as to why....wrong connectors, software issues etc... I’m going to reach back out and see if I can get them to clear it up for me a little. If it’s as simple as swapping the display and...
  11. Tapps33

    2010 LR4 Multimedia interface update/upgrade?

    I like to look of this system, and honestly, while I like the expanded screen of some of the other systems, I worry about the longevity of them, as well as their ability to work....all the time....without crashing! That said, it looks like this may only work with the 2012 and newer systems...
  12. Tapps33

    5.0 supercharged into an LR4?

    Couldn't upload all the pics.... here are the rest. Disclaimer: the system jumbled the order all up. That said, I think I figured out how to post them in order on this post.... so this one should be in order. Sorry!
  13. Tapps33

    5.0 supercharged into an LR4?

    Ok, I thought I'd post what's in the manual about the adaptive suspension system. It's kinda cool, not gonna lie! Plus, the way it works, limiting the torsion like it does could be HUGE in terms of the LR4! That said, the guy I got all my computer modules from already scrapped the donor...
  14. Tapps33

    Crossover pipe flange dimensions

    Sorry, probably should have posted this sooner! The motion race works Coyote billet water pump to AN adapter (part# 1210001) should fit for the purposes of the electric water pump swap. Unfortunately though, the billet heater hose l/crossover port fitting (part # 1210005) will not fit for...
  15. Tapps33

    5.0 supercharged into an LR4?

    Ok, so I did a little research in the shop manual for the RRS regarding the adaptive response handling system. Truthfully, I don’t know how “seamlessly” it will transplant as opposed to the engine. While the adaptive torsion bars may fit on the frame, you have to find space for the pump...
  16. Tapps33

    5.0 supercharged into an LR4?

    Tell me more about the adaptive dynamic suspension..... In theory, as I have to swap all the computer modules, the vehicle thinks it’s a RRS supercharged. Aka, the body control module, abs module and ECU will all be swapped. (Plus a few others to make sure all the VIN coding matches). So I...
  17. Tapps33

    5.0 supercharged into an LR4?

    I’m excited for the efan and water pump too. The only thing I’m running into difficulty finding an “off the shelf” solution for is the crossover pipe engine block ports. It’s beginning to look more and more like I’ll have to just fabricate the fittings as the ports are 33mm in diameter...
  18. Tapps33

    5.0 supercharged into an LR4?

    Haven’t gone through with it yet as I’m scrambling to finish up a home renovation project first. (Wife’s orders). That said, I’m headed to pick up the last of my parts next Friday (Oct 2nd). That pretty much completes the parts collection save a few random electrical connectors here and...
  19. Tapps33

    Whiiiiiiiiirrrring Sound VS. RPM

    Yeah, @SkyTree sounds like he’s on to something. If there’s one thing about these trucks that never ceases to amaze me, it’s the ability of a fluid flush and replacement to bring systems back to life. I’ve had lots of other vehicles and really I never noticed a difference when I would flush...
  20. Tapps33

    Whiiiiiiiiirrrring Sound VS. RPM

    Hmmm....don’t know that I’ve heard that one myself. I’m assuming it’s coming from the left side of the engine? If so, it resembles a power steering pump that’s growling, and that is indeed located over there. Is the AC off? Is it throwing any codes? Do you have a discrete scanner to pull...
  21. Tapps33

    Any ideas what this is??

    If you look at the wheel well plastic, there are 2 holes, pretty much on center in front of the wheel/tire. LR uses plastic screws and expansion grommets to secure the antenna to the fender well plastic. These can pretty much be found at any auto parts store. Half the time I’m taking the...
  22. Tapps33

    Air suspension leak issue

    Hey @RobRover88! Any chance you can give a brief description of the emergency air system/setup? As some or who’s had a compressor fail before, I’m curious as to how this emergency system works. FYI, riding around town on the “stops” is not fun....especially when it takes over a week for the...
  23. Tapps33

    P0171 and P0174 solved....finally!

    I think it was $35 per kit, plus tax and shipping. I’ve been burned by low quality parts before, and while it may cost me a few extra $, to me it’s worth it. Sent from my iPhone using Tapatalk Pro
  24. Tapps33

    P0171 and P0174 solved....finally!

    Well, I’m sure there are those out there that have already battled this issue, but it took me a while to finally find it! Long story even longer, I’ve been chasing the P0171 and shortly thereafter the P0174 error codes off and on for about 2 years. (Yes, I know that’s a long time, but I had...
  25. Tapps33

    2012 LR4 HSE Speaker Upgrade

    Hey guys! I know it’s been a while since we visited this thread, but I have an update I’d like to share... To remind everyone, I’ve got a 2010 LR4 with the 400W Logic 7 system. We were discussing an amp swap from a 12’ and up 825 watt system into the earlier year models. Well.....I bought...

Latest posts

Members online

No members online now.

Forum statistics

Threads
37,146
Posts
226,329
Members
31,263
Latest member
KyleK951
Top