Search results

  1. jlach993

    Well crap!

    What in the actual ****.....
  2. jlach993

    Exhaust opinion?

    :D:D:D:D:DHahahaha...but yeah on a more serious note, how does one make it more lower and burbly?
  3. jlach993

    Exhaust opinion?

    Thanks for the input everyone. Quarantine has my ass bored LOL i needed some excitement in my life. I’m in Queens NY....we’re not opening up probably until July smh.
  4. jlach993

    Horrible grinding sound when starting engine

    So what you guys are saying is that the starter is most likely bad and the flywheel is still “okay”? I figured once i start hearing the grinding noise, the flywheel is damaged already. I’ve been hearing this sound for the past 3 months or so....
  5. jlach993

    Horrible grinding sound when starting engine

    Anyone ever have any issues with their starters or flywheel? I have a horrible grinding sound every 5-10 startups. I figure its some chipped/worn teeth on the flywheel. I’m not sure if the starter is maybe loose or if its the actual flywheel. Anyone have any experience with this? I did some...
  6. jlach993

    Exhaust opinion?

    What do you guys think? Resonators/center muffler delete with the addition of two magnapacks from magnaflow with straight pipes added to connect back to the rest of the stock exhaust? What do you guys think in terms of sound and engine performance changes if any....
  7. jlach993

    Cloudy/Dirty HID Projector Lens

    2011 with 88k miles. I just changed my xenons out since they’ve never been changed and it seemed dim. Anyways upon firing them up i noticed that the projector lens is pretty foggy. It seems theres a film over it. Has anyone noticed/attempted to remedy this? If you look at the pics you could see...
  8. jlach993

    3K oil change intervals for our LR4s?

    No idea....but i baby my truck. Always let it idle down itself after starting, no jack rabbit starts and putting on the handbrake and letting it roll in neutral before shifting it into park. However sometimes i do floor the shit out it on the weekends on a hot engine....
  9. jlach993

    2012 LR4 HSE for sale

    I agree...keep the old boy Brian.
  10. jlach993

    2015 LR4 BRAKES

    It’s a normal brake job and not any different than a Toyota Prius. The parts however could be expensive...i used the same kit from lucky8 above posted by Michael. Also those sensors are a pain in the ass to change so i just cut them and joined the wires together and taped them off...not like...
  11. jlach993

    3K oil change intervals for our LR4s?

    island rovers out in Ronkonkoma...
  12. jlach993

    3K oil change intervals for our LR4s?

    Hey everyone, i was chatting with a rover specialist out in Long Island, New York and he explained that oil change intervals should be every 3k miles or three months on our LR4's. He said that even 5k/6 months intervals were too long for this vehicle. Apparently our engines are very prone to...
  13. jlach993

    RSW Tool Ride Height Calibration Values?

    Hey everyone, I just purchased the RSW tool and found that my ride height levels were all different values. What should they normally be? I posted a pic of the current values....
  14. jlach993

    Suspension Diagnosis

    I had the same exact issue, along with a suspension fault. It turns out i needed a new battery. Its been two years later and all is fine.
  15. jlach993

    5.0 Engine Mount blown

    Wow what imbeciles...
  16. jlach993

    Low Battery: Start Engine - Battery fine...Alternator working great

    So the LR4 is a weird truck when it comes to battery issues. First of all, upgrade the stock battery to an H8 AGM battery. It fits in the stock location plumply. Secondly, your battery will test fine after shutting the truck off even if the battery is shot. You have to give it an hour without...
  17. jlach993

    Grinding noise when starting

    Hey all, i have this horrible metal grinding sound when starting my LR4. It happens probably 2 out of every 6 starts. It lasts a quarter second and the engine fires us and behaves normally. I never got any codes or had any affected performance. I'm guessing it has to do with my starter and the...
  18. jlach993

    Trunk not opening

    Ill try the actuator then. Thanks for your help.
  19. jlach993

    Trunk not opening

    If it was the actuator, then wouldn’t it at least make the clicking sound when pressing the button? Are you sure it’s not the actual rubber trunk button? I was thinking maybe there’s corrosion inside the button and it’s not making contact with the circuit when pressing the button?
  20. jlach993

    Leather Cleaner ?

    Lexol all the way. It absorbs into the leather after 10 mins. Clean with the orange bottle first and then condition with the brown bottle. It’s “leather food”, not that oily crap like armor all.
  21. jlach993

    Trunk not opening

    Hey everyone, i started getting an issue where my trunk wouldn’t open at all when pressing the tailgate latch button by the license plate. I know there are forums on this exact issue, but my situation is different whereas i do not get any clicks or the sound of it opening. Others have mentioned...
  22. jlach993

    LR4 -> Defender anyone?

    totally agree...i cringed
  23. jlach993

    LR4 -> Defender anyone?

    Check the last shot out Now that’s an Ad
  24. jlach993

    Engine Diagram for LR4 5.0L Engine

    Thanks a lot!! I really appreciate it.
  25. jlach993

    5.0 Engine Mount blown

    Does anyone know how to go about changing these mounts? I’m planning on doing them myself.

Latest posts

Members online

Forum statistics

Threads
37,146
Posts
226,329
Members
31,263
Latest member
KyleK951
Top