Search results
-
-
-
Towing - I Have Not Done My Homework...
He is correct also about the way the plug bracket fits in, I'll get a photo for you if I remember... Yeah - it's pretty easy. -
Towing - I Have Not Done My Homework...
I also just went through this, I bought the British Atlantic kit that comes with written instructions and there's a video on YouTube (from British Atlantic). Install is pretty basic and needs minimal tools... The hardest part was getting the harness/bracket through the existing hole in the... -
Can't get into Extended mode
Watch some videos first and perhaps see if you can get comfortable with the work? I tend to watch many videos before tackling a job; I then assess which one I trust the most and then oftentimes I'll use it while doing the work. It really depends on the complexity of the work but I try to build... -
Tech inspection failed
Tell them to do it again on their dime, if you specifically asked for OEM that's what they should have installed... -
becoming collectible
I hope this doesn't mean you're leaving us? Us newbies need you :cool: -
Can't get into Extended mode
Here's where I documented servicing the valve blocks, I believe others have used the O-rings that I used and have had success: https://www.landroverworld.org/threads/2012-lr4-reluctant-to-lower-from-off-road-suspension-mode.44636/page-3 -
Can't get into Extended mode
That's seems super expensive; I watched a few videos to see how to do the swap and it looked pretty easy; I'm having trouble to quickly find OEM spring/shock prices but even at $600 or $700 per corner that would still be less in parts than they're quoting for either end... Anyway, why replace... -
Can't get into Extended mode
I believe you can also look at the air springs as they have the original date on them, I believe this is quite well documented on this and other forums. Mine is a 2012 as well (98K miles) and is still on the original springs; I have no intention of replacing them until they fail but I also... -
Threshold scratches....the ocd in me
So I can now classify myself as OCD :), here's a thread I started: https://www.landroverworld.org/threads/interior-sill-plate-protection.44915/ So you just used the grips to bend the Discovery 5 plates, any downsides yet? -
Going to be a fun weekend baselining all fluids and filters
And mine the weekend after! This looks like lots of fun... -
Suspension Fault When Parked on Incline
I suggest figuring out what type of compressor you have (in my post I have an AMK and show pictures of it - this can help you identify what you have); then in the GAP tool you can identify what firmware you have. If there's a mismatch between the two (AMK physical compressor and say Hitachi... -
Suspension Fault When Parked on Incline
I literally went through all my valves, everything, trying to chase this issue... I flashed the firmware once the GAP tool arrived and it was like a switch; the code went away and so far didn't come back (it's been 16 months)... I hope you have the same issue and resolution but defer to those... -
Suspension Fault When Parked on Incline
I had a lot of fun with this very same code and also noticed issues an an incline... Here's the thread: https://www.landroverworld.org/threads/2012-lr4-reluctant-to-lower-from-off-road-suspension-mode.44636/ To cut a long story short, the compressor was incorrectly specified in the RLM ECU... -
Look at the miles
Price looks pretty darn good as well (just over $4K), I know that $5K is the number usually quoted; I also see they mark it as 19hours, my local Indy said 18hours; so good ballpark figure there as well... -
becoming collectible
It does seem a little dodgy, also with 3 previous owners... -
Different oil level readings with hood open
Why, it won't be full, we already know that it takes time for the oil to drain back to the sump, it's basic fluid mechanics... -
Different oil level readings with hood open
Agreed! A plot would be interesting but is obviously dependent on the viscosity of the oil and other variables. -
Different oil level readings with hood open
"How long was the interval between the photo ending in 14 and the one ending in 16? If you use the "hood open/cancel twice" trick soon after stopping the engine, you can actually watch the oil level indicator rise." Great question, I think what you really need to consider is how long after... -
Injector failure?
Could it be some sort of electrical gremlin whereby re-seating, moving, etc. has caused the fault to disappear? At a stretch I could imagine moving the coil and plug could reestablish a better ground? It's weird! -
2016 LR4 Landmark SCV6 Engine Failure at 65k. WWYD?
This is my understanding; I did recently receive a low fluid warming on my 2012. I plan to tackle the timing chains, crossover pipes and coolant pipes later this summer... -
Only normal Height Available.
First post on this page shows some videos on servicing the front valve block (rear is the same but it's much harder to remove the valve block!), there's also a link to where I bought the replacement o'rings, I also used some silicon grease when installing them, the car stays at normal height for... -
Only normal Height Available.
The front valve block is quite easy to remove, clean and install new seals. I'd be inclined to also spray soapy water on the airspring. It certainly appears you have a leak given the fuse removal. There's been some issues with valve replacement kits; I'll send you a link shortly to the ones... -
Only normal Height Available.
And, was the compressor replaced with the correct type; so these vehicles can have either a Hitachi or AMK compressor, typically AMK came in 2012 and later (I think this was the transition date). You need to know that the RLM Module (the computer dedicated to the suspension) is flashed for the...
