I got the off-road driving light but there’s also an SAE, Spot (what you call pencil), and diffused.
Just checkout the options here
https://www.rigidindustries.com/360-series-360-series.html
Finally was able to finish installing the bracket and lights so sharing some pics mostly to thank asilver for a quality product.
I did not go with the Hellas, I went with Rigid's new 6" 360 LED Driving Lights + yellow tint. As for wiring I went as OEM integrated as possible with no additional...
No, the backlights are just there more so for looks. They project very very little light... i just trigger them with the fogs which turn off when the high beams turn on.
Since I didn't get any hits on a response here I had to reverse engineer the solution myself. So for what its worth I'm following up here for anyone else searching for this in the future.
Regarding the fog light - I had to remove the fog light from the bumper... there was a blue and black wire...
It’s actually pretty easy to remove. You have to remove the inside tailgate panel and then you have immediate access to about 6 bolts (I forget what size) and then the outside tailgate panel with the license plate light comes off as does the ladder. Just reinstall the panel and your good.
So I recently purchased some 6” Rigid 360 driving lights that will be grill mounted and am trying to figure out the best way to wire them. The lights have a backlight that I’d like to wire to the factory fog circuit and the actual driving beam to come on with the high beams. I have two relays...
I also recall reading in the manual somewhere that if you get out of the car in park with the hazard lights on you can operate the air suspension with the key fob. I forget exactly the which buttons do it so maybe somebody else can chime in on that.
Its intended for towing and...
One thing I found recently was that in the audio section of the menu there's a "CD Changer". That however is not the cool find... you can actually upload up to 10 cd's into it. There's actually no physical changer.
I currently have the OEM Land Rover external winch kit and was interested in moving to the Prospeed Hidden Winch and Bull Bar but realized one creates an issue for the other.
To install the OEM winch kit the unpainted lower center section of the bumper had to be cut. Since the Prospeed doesn't...
I thought I'd post this as an FYI for anybody that either had replaced and/or disconnected your battery or experienced your windows no longer automatically rolling up with the firm pull of the button.
After experiencing the issue myself I found that upon disconnecting the battery the windows...
I’m curious to what you mean by this? I do have sliders and a solid rear bumper so was thinking, in a pinch, I could use. But def will not be doing that if it’s going to “crease” the door.
Yeah that's partly why I was asking because I already have a really great jack for our cars except its a low profile so i'm pretty sure it won't go as high as i need for the LR.
I know its for offroad purposes but does anyone have experience with one of these?
Hi All, I was looking at rods and/or other lifting options and dumbly realized I'm not even sure I have a jack that can go high enough to remove the wheels [being somewhat new to LR4 ownership]. So... my question is basic. What are the best practices for jacking our LRs?
Funny you just posted this, I came across this exact thread to ask the same question.
Also curious about Llams pricing, without emailing them I was unable to find the cost. Can anybody give a rough idea?
Thanks for replies, it's a legit question you bring up and not entirely out of the picture. Being honest, my wife has it on her car and is so accustom to it that a few incidents have almost occurred. I wanted to gauge the OEM option first before going that route.
Does anyone know where to check...
I have a 2013 LR4 that I was looking into a few retrofits on and unfortunately needed to tackle this one first due to the family situation (not pointing a finger at my wife). Is it possible and does anybody have knowledge on how to retrofit the blind spot monitoring mirrors onto an LR4 without...
I'm having some trouble figuring this one out too. My manual says its a PY 24W for the front but any of the PY24w bulbs i've tried do not fit.
The first image here is a PY24w
The second is what my bulb actually looks like.
You can see they're close but the actual bulb has a much longer stem.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.