Search results

  1. S

    Replacing Fuse Panel

    Picked up a new fuse panel for my 97 RR 4.6 and will attempt to install it myself. It looks pretty straightforward. Disconnect battery and carefully unclip/reattach the connectors to the bottom of the panel. For those of you who have done this, are there any pitfalls or anything I should...
  2. S

    No HVAC or radio

    Power steering doesn't seem more stiff. I have a 1997 4.6. Cigar lighter is also out. I assumed it was the BECM. My initial thought was to swap it out with another unit, although I don't know if that is possible or if it has to be reprogramed.
  3. S

    No HVAC or radio

    Last night while driving, I lost my HVAC display and the radio went dead (blower fans stopped and no sound from stereo) but otherwise drove fine. I shut off the truck, restarted and the displays (blower fan) came back on. This morning, no HVAC or radio display, but the red security light on...
  4. S

    AC Compressor Clutch

    Can anyone point me to very detailed step-by-step instructions of how to remove the spacer behind the ac compressor clutch? I have a 97 4.6. Thanks.
  5. S

    1999 2.5 P38 - Overheating Problem -Help!

    I had the same issue. Turned out to be a bad expansion tank cap. It wasn't holding pressure, which would result in coolant shooting out of the tank when pressure would build up. US$25 did the trick. Good luck..
  6. S

    assistance needed

    I can relate ImBroke I bought a used RR which was converted to coils by a prior owner. I am really tempted to convert back to air. I'm afraid of opening up a can of worms as I have no idea what failed prompting the prior owner to convert to coils.
  7. S

    Temp Gauge on RED and coolant boiling over

    Follow Up I got lucky. Bad overflow cap. $25 Fix. Expect the worst & hope for the best. Thank you all for your insight. Cheers.
  8. S

    Temp Gauge on RED and coolant boiling over

    T-stat replacement Does anyone have any detailed instructions on replacing the t-stat? I have a 97 4.6. Once again, thanks guys.
  9. S

    96 HSE Range Rover

    That would be very helpful. Thank you. [email protected]
  10. S

    96 HSE Range Rover

    Akareh: How did you get the mirror off? I received my new one from Magna, but I am having a touch time trying to pull if off. I'm concerned about cracking the windshield. Is there a trick?
  11. S

    96 HSE Range Rover

    MagnaDonnelly is the company that manufactured the rearview mirror. There are a number of posts concerning replacement. Contact them, and they will replace the mirror for free!! They are great. Truly committed to customer service. They just sent me a new one last month, and I have a 97 4.6...
  12. S

    Temp Gauge on RED and coolant boiling over

    Thanks for the good advice. I will replace the cap and t-stat and go from there. I will post a follow up in a few. Thanks much. Cheers.
  13. S

    "Ignition Key In"

    Thanks Wires. I sued WD40 and it did the trick. No problems since. Thanks for the insight.
  14. S

    Temp Gauge on RED and coolant boiling over

    Hello all: Last night, while driving home, the temp gauge on the dash was red. I pulled over to find that coolant was boiling out of the overflow reservior. The water pump was replaced by the prior owner, and no hoses appear broken. In reading the posts, it appears that it could be the...
  15. S

    "Ignition Key In"

    Thank you. That was my initial thought too. In doing a bit of research online, I discovered a post addressing this very problem. The tech stated that the inner tumbler of the ignition switch did not release when the key was removed. He instructed to lubricate the ignition switch and all...
  16. S

    "Ignition Key In"

    Hello all. This morning when I went to shut off my 97 4.6, I removed the key from the ignition. when I opened the door, the message center said "Ignition key in" after the key was removed. I tried locking the car with the remote, but it wouldn't lock. I manually locked it and two faint beeps...

Latest posts

Members online

Total: 363 (members: 3, guests: 360)

Forum statistics

Threads
36,276
Posts
218,190
Members
30,501
Latest member
gvillalongo

Share this page

Top