96 D1 No Spark!!!!!!!!! Help

[TIMO]

I just put the thing back together after a valve job, all connectors are connected didn't touch the camshaft or crank sensors... I have good fuel pressure but no spark. How can I tell if the coil is getiing the right signals from the computer??????? OR HOW CAN I TEST THE COILS TO SEE IF THEY ARE BAD AS I HAD A MISS FIRE CODE BEFORE THE VALVE JOB WAS DONE......... Tim

 

[joey]

If you removed the battery, you need to reset the alarm ECU... either unlock the drivers door with the key 4 times (lock/unlock) or use the remote.... this should clear up the issue.

 

[TIMO]

Thanks I found that the crank sensor came unplugged inside the guard....So I'm all set... Thanks again............Tim

 

[joey]

Glad you found it.