Recent content by JimBonner8
-
J
HVAC lights not illuminating
Have a look at this link. It covers replacement for most all instrument related bulbs. It is light on how to access the odometer backlight & main cluster but it provides, photos, bulb part numbers & descriptions for each bulb. Brilliant...- JimBonner8
- Post #6
- Forum: Discovery
-
J
Cruise Control Vacuum Pump, what I learned
Nice write up. Gonna have to give this a go... Thanks!- JimBonner8
- Post #11
- Forum: Discovery
-
J
Check Engine; Error Codes
UPDATE Joey - air cleaner is good to go complete with new filter. Mike -- battery is up to spec on voltage Took the car to the dealer two weeks ago -- they identified a short in the Evap circuit and so they said they isolated it. The car was running great for them with all the numbers...- JimBonner8
- Post #11
- Forum: Discovery
-
J
Cabin Light Stay On -- Doors will not Lock w/Remote
I did some more digging and discovered this in another forum: "On a DII there are part of the door latch. On a DI they are on the door panel on the truck and work like the door switch on your fridge. Take a spray can of silicon spray and lube all of your door latches and hinges and see if...- JimBonner8
- Post #2
- Forum: Discovery
-
J
Cabin Light Stay On -- Doors will not Lock w/Remote
When I close the doors the lights stay on for a very long time and the horn blows when I try to lock doors. I have checked all the doors and they are firmly closed. I do not see switches on the frame to indicate that the door is closed. How does the electrical system work for this application. I...- JimBonner8
- Thread
- Replies: 2
- Forum: Discovery
-
J
MAF sensor?
Best price I found for an MAF for the Disco II (4.0 L) was $123.85 at Parts Geek. It is the Bosch OE part.- JimBonner8
- Post #16
- Forum: Discovery
-
J
Check Engine; Error Codes
Joey As noted in my previous post, we are having issues with the MAF. Could it be the result of a loose connection or not connection at the ECU (connector 3 pin 7 (5v) or pin 9 (earth) or even pin 23 (analog 0-5v)). Or could it just be that the ECU needs to be reset? Thanks, Jim- JimBonner8
- Post #7
- Forum: Discovery
-
J
Check Engine; Error Codes
Brodie, We are slogging thru right now. Have replaced the O2 sensors, the camshaft position sensor and the MAF. The MAF is not being recognized by the ECM; the mechanic gave the MAF a very very slight tap and it began to work. Then is stopped (I have no explaination for this). So at first, we...- JimBonner8
- Post #6
- Forum: Discovery
-
J
Check Engine; Error Codes
The Check Engine light came on recently. At the same time, I noticed some performance issues, particularly when accelerating from about 25 MPH; the car would hesitate before taking off. I had the folk at my garage pull the error codes and we discovered 14 of them. P1590 -- Mfg Specific Code...- JimBonner8
- Thread
- Replies: 14
- Forum: Discovery
-
J
2001 Disco II Owner
Marty Thanks for the welcome...and my apologies for the long delay responding. Well, I decided to plunge forward -- I took the interior door panel off & removed the vapor barrier (carefully cutting with a sharp blade). At that point I decided I am not qualified to fully repair it so I got the...- JimBonner8
- Post #3
- Forum: Introduction
-
J
2001 Disco II Owner
We've owned the auto for about 3-1/2 years. Been a good runner although I did have the head rebuilt about a year and a half ago. Still, all in all, it has been great. I really enjoy driving it! We got it with 81,000 on it; now have just over 175,000 miles. The head rebuild was done at about...- JimBonner8
- Thread
- Replies: 2
- Forum: Introduction
