Recent content by Mach1s
-
Suspension Fault
Follow the link above from hell pie. I think someone on that thread had the dealer fix theirs for a cost of about $1400,00 as I recall. he pump is very easy to replace with very few tools needed. There is a thread that someone started showing it step by step. A new air pump from LR is like... -
Suspension Fault
I would start the truck and try to raise it to Off Road Height right away before the light has a chance to come on. If it raises, let it sit in the raised position over night and see if the height changes. Upon restarting the truck, see if the light comes on. I could raise mine and it would stay... -
Need LR3 Passager (right) side rear door.
Need a door to replace a banged up one on my 06 LR3. It would be nice to get one in White to match mine but will consider others. Let me know what you have and a price. Thanks!! -
Suspension Fault
You can compare it to Hell Pies thread. He has better pictures of the LR pump -
Suspension Fault
The Ford motor is smaller than the LR motor and the circuit boards are very different. The Ford does not use a rear bearing to support the rear of the rotor like LR does either. they seem to be completely different animals. Here is a pic of the Ford motor. -
Suspension Fault
Here is a pic of my burn't out motor. Pic is blurry but you get the idea. Camera cannot seem to focus at close range. -
-
Suspension Fault
Back on Topic Got the Ford compressor and it is different. It may work but you will still throw codes is it has no provisions for the thermal sensor and the exaust is not compatable. Look at the pics. I broke down the Ford unit to see what went wrong with it and it seems to have a severe... -
Name that steering sound
I would check the upper control arm to make sure it is not rubbing on the aluminum air bag can. You may have some damage from wheeling that you don't know about. -
Suspension Fault
I am picking up a used Expedition compressor tomorrow from my friend @ Ford. I will post pics of the pump. Took my OEM pump apart today... Everything is good but the small circuit board @ the base of the motor. If anyone has an old pump laying around, I will pay shipping??? I will post pics of... -
Suspension Fault
I wondered the same about the Mr. Glasscock post. This is what they sent me. Marion said he will try to come up with something else. It is a pdf. file. Can't upload it. Dam, not really any good info anyway. Will try to change file type. -
Suspension Fault
Talked to Marion @ arnott and he said they have nothing yet for the LR3. Said they are working on the bags first. He thinks the Ford pump will work but no thermal switch and different mounting locations. He is going to send me a spec. sheet on it so I can compare it to the LR3 pump. Here is a... -
Suspension Fault
Expedition Pump Here's a picture. Hopefully this works. The lines are different and the wiring. -
Suspension Fault
The Expedition pump is definetly different but only like $180.00. Here is a link http://www.amazon.com/1998-EXPEDITION-SUSPENSION-COMPRESSOR-DRYER/dp/B004DZ2EU2 If anyone has done this, PLEASE let me know!! -
Suspension Fault
Anyone have any idea what year Expedition (Ford) Compressor works on the LR3? Does anyone have a diagram as far as what the ports on the pump are and maybe a diagram of the EAS system? Would like to setup an schrader valve to pump up the air springs in case of failure like this. It's hard to...
