Recent content by steach

  1. S

    3 amigos and a question

    Thanks for advice on the MAF. I took the wheels off and cleaned a little rust off the ABS sensors but the lights are still on. What would you look at next?
  2. S

    3 amigos and a question

    I will look at them again today and see if they unscrew. Thanks for the code reads.
  3. S

    3 amigos and a question

    I have searched the 3 amigos thread and there is lots of good information. I checked for diagnostic codes and had two. a PO307 and a P1590. What is the P1590 related to? Back to the 3 amigos, I tried spraying them off with carb cleaner and a pressure washer as discussed in the thread. Still...
  4. S

    More that one issue

    Solved Sorry for the delay in responding. I had the rotors turned to resolve the shakes. The noise was caused by ujoints in rear of front drive shaft. They are "not replaceable" so had to put in new shaft. Expensive but fixed the problem though. Thanks, Joey, you were right on in your...
  5. S

    More that one issue

    It seems the issues come in bunches. I wrote earlier re shakes. Here is my new issue. The truck has started making a clunking sound when I put it into drive. I repeated this several times in the drive and my leveling system light, ABS light and several others came on. When I turned it off...
  6. S

    Shakes

    Joey, Thanks for the response. I looked at the panhard rod. Should it twist easily on each end or is this a sign that the bushings need replaced. Steve
  7. S

    Shakes

    My 99 DII has developed the shakes! It has 87,000 miles and I have rotated and balanced or the tires. When I apply the brakes and slow from 50 to 40 it shakes. When I apply the brakes at any speed it pulls to the right. Any ideas on trouble shooting? Thanks.
  8. S

    Searching for MAF

    Problem solved! What about O ring? I installed the new maf sensor, erased the error messages and the SES light has stayed off. I had the vehicle inspected today and it passed. I purchased the maf from Coventry West in Atlanta $137.00 plus tax and shipping, total $155.00. Thanks again for...
  9. S

    Searching for MAF

    Update Joey and others, thanks for monitoring the site. I will post a status later this week after I get the new maf installed.
  10. S

    Searching for MAF

    Thanks for the reposne I cleaned the uit with a spray electrical contact cleaner. I also have cleared the codes after cleaning. Several times. The error codes PO734 0171 and 0174 come back repeatly. After viewing numerous posts to this and other boards it seems that replacement of the MAF...
  11. S

    Searching for MAF

    I need to buy a MAF senssor for a 1999 DII. Does anybody know the best place (cheapest and good response time) to get one? Already cleaned the old one and the SES light is still on! Need to pass inspection for tag asap.
  12. S

    Missing fuel filter on 99 DSII

    Thanks for the info. I will look into cleaning that screen.
  13. S

    Missing fuel filter on 99 DSII

    I am wondering if a 99 +DSII has a fuel filter. I received the RAVE CD and do not see one listed. It does mention a screen in the pump area of the fuel tank. Is this correct and the screen is the only filter or did I just miss something. I have two error codes for lean banks and want to...
  14. S

    SES light on 99 DSII

    Light is out for now! I bought a scanner today and used it to reset the codes. So far the SES light is out. Will see if it remains off. Thanks for the advice.
  15. S

    SES light on 99 DSII

    Still on! Driving the truck has not reset the SES light. What needs to be done to reset the computer? Thanks.
See more

Latest posts

Members online

Total: 379 (members: 6, guests: 373)

Forum statistics

Threads
36,720
Posts
222,750
Members
30,892
Latest member
Slytrellis

Share this page

Top