Pics/advice on your rear license plate/camera relocations

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

CRYA

CRYA

Full Access Member
Joined
Apr 14, 2021
Posts
417
Reaction score
254
Location
Napa Valley
Hey gang. While I currently have a spare tire mount on passenger side, I'm adding the jerry can carrier to the driver side which will block the plate and camera. I'm interested in pics seeing how y'all tackled the relocation and what you used, where you ran the wiring etc.

TIA
 
powershift

powershift

Full Access Member
Joined
Jul 20, 2023
Posts
1,105
Reaction score
385
Location
Nevada
I don't have an answer for you but would like to also have custom cameras. One for left and right sides plus the rear so that I can black-out the windows in back. Haven't found outdoor hi-res cameras yet that are small enough. But I'd like to hook them up to a linux box with a touch screen and then I could pick whatever views or all views dynamically while driving. That would allow the removal of the rear view in the windshield which I'd like very much. A camera could mount near its place looking forward.
 
F

ftillier

Supporting Member
Supporting Member
Joined
Jul 27, 2021
Posts
923
Reaction score
507
Location
Portland, OR, USA
The jeeps have a camera that goes through the center bore of the spare, seems to work well until you hang something on the spare tire that blocks the view (like a trasharoo). Wiring is another matter, since the camera is in the hatch not the tailgate...
 
greiswig

greiswig

Supporting Member
Supporting Member
Joined
Mar 1, 2021
Posts
724
Reaction score
332
Location
SW Washington
Amazon camera, mounted to the spare rack with a piece of heater hose so it pokes out of the center of the spare. You can see the vinyl tube encasing the cable where it joins the bumper at the hinge point at lower right.
 

Attachments

  • IMG_0127.jpeg
    IMG_0127.jpeg
    142.6 KB · Views: 20
CRYA

CRYA

Full Access Member
Joined
Apr 14, 2021
Posts
417
Reaction score
254
Location
Napa Valley
greiswig said:
Amazon camera, mounted to the spare rack with a piece of heater hose so it pokes out of the center of the spare. You can see the vinyl tube encasing the cable where it joins the bumper at the hinge point at lower right.
Click to expand...
That's a solution that works for sure, but I do run a trash bag on my back, and I have a tire cover on my spare to boot. I think I'll have to find something to mount on the jerry can holder which will house both the camera, license plate, and light.
 
F

ftillier

Supporting Member
Supporting Member
Joined
Jul 27, 2021
Posts
923
Reaction score
507
Location
Portland, OR, USA
extra credit if you find a way to reuse the license plate light/camera holder handle thing from the tailgate and mount that to the jerry can holder. :D
 
RandyLove

RandyLove

Member
Joined
Oct 28, 2021
Posts
13
Reaction score
8
Location
Reno, NV USA
I did this on a previous LR4 of mine and didn't love it as much as I thought I would.

Take into consideration I have the Terrafirma swing away tire carrier, and the spare tire blocking the view of my backup camera was the impetus to install another camera.

So I bought a spare time camera mount (camera included) like this:
1780428994487.png

And a Fakra to RCA video cable adapter:
1780434603119.png

I tapped into the backup lights in the rear quarter panel to power the camera when the vehicle's in reverse, but if I was going to do it again, I'd tap into the power provided to the factory camera so it would stay on a bit longer.
1780434908686.png


Videos of mounted camera:

Dropbox

bit.ly bit.ly

Dropbox

bit.ly bit.ly

Video of what the interior screen looks like with the stock camera first, then the tire mounted camera. In the end I didn't care for the tire mounted camera because I lost visibility of the hitch, which is really useful because I do a bit of towing.

Dropbox

bit.ly bit.ly

Hope this helps!
 
CRYA

CRYA

Full Access Member
Joined
Apr 14, 2021
Posts
417
Reaction score
254
Location
Napa Valley
RandyLove said:
I did this on a previous LR4 of mine and didn't love it as much as I thought I would.

Take into consideration I have the Terrafirma swing away tire carrier, and the spare tire blocking the view of my backup camera was the impetus to install another camera.

So I bought a spare time camera mount (camera included) like this:
View attachment 27068
And a Fakra to RCA video cable adapter:
View attachment 27069
I tapped into the backup lights in the rear quarter panel to power the camera when the vehicle's in reverse, but if I was going to do it again, I'd tap into the power provided to the factory camera so it would stay on a bit longer.
View attachment 27070

Videos of mounted camera:

Dropbox

bit.ly bit.ly

Dropbox

bit.ly bit.ly

Video of what the interior screen looks like with the stock camera first, then the tire mounted camera. In the end I didn't care for the tire mounted camera because I lost visibility of the hitch, which is really useful because I do a bit of towing.

Dropbox

bit.ly bit.ly

Hope this helps!
Click to expand...
That looks pretty clean. I'm just stuck because my spare wears a NBX trash bag so no good place to mount. I'll keep looking.
 
You must log in or register to reply here.

Similar threads

C
Rear license plate housings
Replies
7
Views
1K
MellonRover
MellonRover
S
Name that part!
Replies
0
Views
294
santourak
S
carid
Warn Rebate Alert: Save on Top Off-Road Accessories!
Replies
1
Views
869
carid
carid
triwyn
Hazards, Christmas Tree, No Crank, Hear me out please…
Replies
5
Views
14K
steevo
S
B
Traxide D3-DU dual battery kit on 2013 LR4 Help Please..
2
Replies
10
Views
10K
gabrielef
gabrielef

Latest posts

Members online

Total: 1,296 (members: 1, guests: 1,295)

Forum statistics

Threads
37,146
Posts
226,329
Members
31,263
Latest member
KyleK951

Share this page

Top