Search results
-
Air Suspension head scratcher
Well, I got her up in the air, and snoopy'd everything I could get to. As @Longtrail said, it's a giant PITA to get to and see anything under there. Long story short, I couldn't find any leaks. I tested the voss fitting on the air strut, the air strut itself, and as much of the line and... -
Air Suspension head scratcher
Wow! This is why I love this forum! Although, I feel like a complete slacker in that I don't have more data points to populate the graph! I'm tearing it apart this morning, I'll try and take pictures/videos and get them posted when I'm done....really hoping it's easy to spot, but experience... -
Air Suspension head scratcher
I totally agree! the auto hobby shop on base isn't open today and its raining and nasty here...aka no driveway work, so tomorrow I'll go pull the wheel and see what I can find. Hopefully it's just a leaking Voss connection! If not....it'll be more $$....:afraid: -
Land rover LR3 Reservoir valve code air suspension disaster.. PLEASE HELP
Since it seems like this problem is "moving" through out the system, I would suspect something centrally connected to everything....more specifically, the air suspension module seems to me to be where your gremlins reside. As I believe the air suspension module for the LR3 is on the driver's... -
Air Suspension head scratcher
Ok, so here we gooo..... I pulled engine bay fuses F3 and F26, 5amp and 20amp respectively at 4:40 yesterday. I measured 1 hour later, 3 hours later, then again this morning (15 hours later) Time 0, 1hr, 3hrs, 15hrs LF 19 3/8" - 19 3/8' - 19 3/8" - 18 7/8" LR 20" - 20" - 19 7/8" - 19 3/8"... -
Air Suspension head scratcher
Thanks for all the advice! For an apparently "simple" air system, this is really driving me crazy. I'm going to set the the suspension in extended height this afternoon and take measurements, then again in an hour, then just prior to the 2 hour mark, and so on and so on. (with the fuses... -
Air Suspension head scratcher
I don't believe it opens the cross valve....although I could be wrong. If I read the manual correctly, it makes small downward adjustments to "level" the vehicle. This would indicate it exhausts the higher side valve to bring it down in line with the "leaking" side. Which again goes back to... -
Air Suspension head scratcher
Wow, so that would hint that if the gallery pressure drops, the four corners are not as isolated as assumed.... Which would lend itself to the thought that if the reservoir valve, or a rear gallery line I haven't replaced is cracked/failed, that could cause everything....but still, with fuse 3... -
Air Suspension head scratcher
It's my wife's DD, so I'll pull fuses and check heights beginning tomorrow evening. -
Air Suspension head scratcher
Thanks for the thoughts, as I agree with you 100%....it doesn't make any sense. for all 4 corners to fall, my thought is that the auto-leveling system has to be working. Because, you're right, even if the reservoir junction block is leaking, it'll just bleed off the gallery pressure....in... -
Air Suspension head scratcher
Sometimes I have pulled both fuses, just in case. Although, to be fair, I didn't do it this last time. I'll pull them both this weekend when I can let the car sit for a day or two and see what happens. -
Air Suspension head scratcher
Hmmm....I never thought about trying to detect the leak during actuation. I'll give that a try in the next day or so. It's raining all day here and I don't have a garage. And yes, the fact that all four corners drop is now officially driving me insane! I'm really hoping I'm just... -
RESOLVED - Air Suspension Fault After De-Pressurize - BIG GNARLY LEAK!
Based off the iiD tool's solenoid values, it seems to me the front valve block may be bad. If the system is commanding it to actuate and it's not "actuating" that's why the values stay at 0. Internal short maybe? Dumb question, but have you checked all the fuses to make sure there's power to... -
Air Suspension head scratcher
Hello all! So, here's my dilemma; I can't keep my LR4 from falling down. I have been trying to trace the leak for years....literally. Some background: Back in early 2019, I replaced all three valve blocks, installed a new compressor (switched from Hitachi to AMK), and replaced all 4 air... -
Side View Mirror replacement not auto dipping
Thanks for the suggestion! The sad part is that I tried that with the first 2 mirrors, but didn't try it with this one! (sometimes I really worry about myself!) Buuuuuuut....Eureka! It totally worked! I guess it just stayed at the "zero" position until programmed into it's dipped position... -
Side View Mirror replacement not auto dipping
Any idea where the mirror part number is stamped? Or, is it the paper sticker that had disintegrated one pretty much every mirror I had/have? -
Side View Mirror replacement not auto dipping
Yeah, I know there's several different versions of the mirrors, and I can't find where they stamped the part numbers, so I'm not 100% sure of the interchange. That said, wouldn't the non-dip mirrors move with the seat memory button? Or maybe that was an "upgrade?" -
Side View Mirror replacement not auto dipping
Hello all! So, a month or so ago, I parked on the street and some lovely individual decided my side view mirror was just too nice to leave it on the side of my truck....insert a very disappointed/angry face when I found the carnage the next day. Anyway, I've run into an issue with my... -
Need a scrap AJ133 block, anyone have one?
For those of you wondering, I've been talking to Darton Sleeves and they're going to design/machine a set of MID Sleeves for the AJ133 block. However, they have informed me there's a better than average chance they'll screw up the prototype block and they want to use a scrapper to get... -
Need a scrap AJ133 block, anyone have one?
Thanks! I'll give them a call! -
Need a scrap AJ133 block, anyone have one?
Hey all! I'm looking for a scrapped AJ133 block. It can be either NA or SC, either version is fine. I need a prototyping block that's going to get destroyed during the machining process....and I don't want to pay $2K for a good block. So if anyone has a scrap block laying around, I'll gladly... -
5.0 supercharged into an LR4?
Actually, I have a few ideas, but nothing has been set in stone yet as I'm still researching....and by "I," I mean there are a few of us working in the background to figure all this junk out. I'm going to run the SC transmission, which is virtually identical to the NA transmission except the... -
5.0 supercharged into an LR4?
Unfortunately, no, not yet. Moving in and settling in has taken longer/more effort than I thought. (All the crap my building inspector missed isn't helping either.). More importantly, I think I've decided to go for a higher horsepower build which involves swapping out the internals for some... -
5.0 supercharged into an LR4?
It's official....I finally got my engine back from the machine shop. I'm going to put the majority of it back together next week....you know, right before I move from Maine to TN. I'll try and do an in-depth write up about the tear down and rebuild process, which ARP hardware I finally found... -
5.0 supercharged into an LR4?
I agree 100%!! The only thing I can think of is they may be "bracing" the cylinders. (See link for better pictures/explanation) http://satistech.com/offer/engine-block-bracing/ I keep going back and forth as to how crazy to try and build this engine. The truth of the matter is that it'll...
