Search results
-
getting that damn eco/stop start light off on the IP
@Davidinseattle: Confirming what others have said - You don’t need to reprogram anything when replacing the start stop battery, and you don’t need to pay $400 for it. The Exide they sell in Europe is exactly the same battery, or you can use a lipo or motorcycle battery you can source locally... -
New Recall Alert : Fuel System
@tacos&beer Not sure what your car is at for years/mileage is, but if you are still in CA and under 7/70000, this should be covered under the CA emissions warranty if they won’t cover it as their own mistake (including all diagnostics, parts, and labor). -
Some codes. Please assist.
Hmmm, a code that set in 2024. must be a problem with the flux capacitor. -
New Recall Alert : Fuel System
Sure seems like it could be related to the work - in fact, seems very likely related to me. I think the ”check gas cap” light is triggered when the EVAP system detects the tank is not holding pressure when it runs a pressure test. I assume a poorly sealed fuel tank flange (the very component... -
New Recall Alert : Fuel System
Any more info on whether the fuel pumps are being replaced with the rest of the unit. Some of the invoice seem to have a part listed as “LR175172 Pump - Fuel” - wondering what that is. -
2015 LR4 having a meltdown at random times. Related to High Speed CAN BUS. Need help!
That is one hellava long list of codes. I don’t know of any wiring that would have been compromised by the windshield install (although I see a code that indicates your windshield mist sensor (auto wipers) might not be working properly, but that shouldn’t cause these problems). I generally... -
2016 LR4 Coolant Crossover, Water Pump, Thermostat Replacement
That’s what mine looked like. I just put it back together. Definitely not worth repairing in my opinion. -
LR4 5.0 V8 - recent timing chain service with 4 new camshaft adjusters - still seems somewhat noisy??
HP fuel pumps are on the passenger side. So, if it’s louder on the driver’s side, not likely the fuel pumps. -
2016 LR4 Coolant Crossover, Water Pump, Thermostat Replacement
No oil will come out the snout. The only oil in the sc is in that little box under the drain plug. It’s the gearbox - isolated from the rest of the unit. Not much volume, and not much oil. Just a little in the bottom to bath the bottom of the gears. -
LR4 5.0 V8 - recent timing chain service with 4 new camshaft adjusters - still seems somewhat noisy??
That’s loud. Doesn’t really sound like exhaust manifold to me. Have you checked for codes recently? -
2016 LR4 Coolant Crossover, Water Pump, Thermostat Replacement
supercharger drain/fill plug is on topside at the back of the sc. i think the recommendation is to use a syringe to withraw what you can, then put back the same amount. -
LR4 5.0 V8 - recent timing chain service with 4 new camshaft adjusters - still seems somewhat noisy??
Gotta upload the video somewhere else (like YouTube) and link it here. You can make it private in YouTube if you want so it's not posted to the world. But can't upload vids directly here (to my knowledge). Could be manifold leak. -
P0170 fuel trim and CEL
Could be a MAF, but this code is bank specific and MAF malfunctions generally affect both banks (air from each “side” is combined when it enters the engine). So, if I were replacing things, I’d go for the o2 sensor first. I would suspect the lamda (pre-catalyst) o2 sensor which is closest to... -
P0170 fuel trim and CEL
Those fuel trims are still basically within normal range (as I understand it) - maybe on the edge of being a little too lean, but nothing that should trigger a CEL. The engine code seems to relate to a plausability failure. There are several subtypes listed in the manual, but they all relate... -
P0170 fuel trim and CEL
Check your actual fuel trims using the gap tool. Run short term fuel trim and long term fuel trim and engine rpm. graph live values at idle, then hold it at about 1500 for maybe 20 seconds, then hold it at 2500 for maybe 20 seconds. take a look at the results and see if its running lean... -
Only 5 quarts of oil drained second oil change in a row (also… drain plug?)
I don’t think 3 quarts in 7500 miles is a ton. I remember my ride in high school would burn a quart every 1000-2000 miles, and it didn’t really smoke much or anything. On the LR4 though, I thought you might get an “add oil” message if you were down 3 quarts. I check the oil level periodically... -
2016 LR4 Coolant Crossover, Water Pump, Thermostat Replacement
Well, I got in there and took a peek with the borescope. Tough to get a visual and tougher still to get a picture. All I have is the top side of the sensor (attached but I could see the bottom side and I’m pretty sure it’s got a tab and cleat on the bottom just like on the top. I believe you... -
2016 LR4 Coolant Crossover, Water Pump, Thermostat Replacement
I‘m thinking there is a tab on the bottom side that grabs a cleat (you pry away from the plug gently to release). I‘ll try to get out and look at mine in the next hour or so - see if I can get a pic with the borescope. -
2014 LR4 HSE LUX- BSM Inop
It should show you if any modules have faults. The solid amber dot means that the system is unavailable. When the car is stationary, you really should see the dot on both mirrors, as the system is non-functional until you start moving (about 8mph). Once moving, if you still have the dot, it... -
Check Engine Light: Camshaft Position Sensor - Circuit Open
That’s great news. Thanks for posting back. -
New Recall Alert : Fuel System
@LR4HD I notice you are in california. If you are under 7yrs/70K miles, your fuel pump should be covered under california emissions warranty. -
2016 LR4 Coolant Crossover, Water Pump, Thermostat Replacement
Update - here is the coupler only, and the description says 17 ft-lb torque on the snout. The owner of this little company (in Michigan if I recall) was very responsive to email questions. https://www.ebay.com/itm/112433704125?epid=8022488838&hash=item1a2d922cbd:g:sMkAAOSwmVVhbMFA -
2016 LR4 Coolant Crossover, Water Pump, Thermostat Replacement
I can't remember what I torqued to, or where I found the info. If you search up eaton supercharger snout torques, you're bound to find some numbers. The eaton spring coupler was a big issue on GM cars and lots of folks replaced. It's not a high-torque or torque-critical application (to my... -
Help identifying 14-16 part (PCV hose) I broke while doing rear crossover.
That’s the correct way to get them off as I recall. I might have cheated with a pliers on a couple - can’t recall. Nothing special though. They are tougher than you’d expect to get off. -
Help identifying 14-16 part (PCV hose) I broke while doing rear crossover.
I believe that’s a vacuum assist line. Try searching for a vacuum hose or the like.
