Search results
-
S
3 amigos and a question
Thanks for advice on the MAF. I took the wheels off and cleaned a little rust off the ABS sensors but the lights are still on. What would you look at next? -
S
3 amigos and a question
I will look at them again today and see if they unscrew. Thanks for the code reads. -
S
3 amigos and a question
I have searched the 3 amigos thread and there is lots of good information. I checked for diagnostic codes and had two. a PO307 and a P1590. What is the P1590 related to? Back to the 3 amigos, I tried spraying them off with carb cleaner and a pressure washer as discussed in the thread. Still... -
S
More that one issue
Solved Sorry for the delay in responding. I had the rotors turned to resolve the shakes. The noise was caused by ujoints in rear of front drive shaft. They are "not replaceable" so had to put in new shaft. Expensive but fixed the problem though. Thanks, Joey, you were right on in your... -
S
More that one issue
It seems the issues come in bunches. I wrote earlier re shakes. Here is my new issue. The truck has started making a clunking sound when I put it into drive. I repeated this several times in the drive and my leveling system light, ABS light and several others came on. When I turned it off... -
S
Searching for MAF
Problem solved! What about O ring? I installed the new maf sensor, erased the error messages and the SES light has stayed off. I had the vehicle inspected today and it passed. I purchased the maf from Coventry West in Atlanta $137.00 plus tax and shipping, total $155.00. Thanks again for... -
S
Searching for MAF
Update Joey and others, thanks for monitoring the site. I will post a status later this week after I get the new maf installed. -
S
Searching for MAF
Thanks for the reposne I cleaned the uit with a spray electrical contact cleaner. I also have cleared the codes after cleaning. Several times. The error codes PO734 0171 and 0174 come back repeatly. After viewing numerous posts to this and other boards it seems that replacement of the MAF... -
S
Searching for MAF
I need to buy a MAF senssor for a 1999 DII. Does anybody know the best place (cheapest and good response time) to get one? Already cleaned the old one and the SES light is still on! Need to pass inspection for tag asap. -
S
Missing fuel filter on 99 DSII
Thanks for the info. I will look into cleaning that screen. -
S
Missing fuel filter on 99 DSII
I am wondering if a 99 +DSII has a fuel filter. I received the RAVE CD and do not see one listed. It does mention a screen in the pump area of the fuel tank. Is this correct and the screen is the only filter or did I just miss something. I have two error codes for lean banks and want to... -
S
SES light on 99 DSII
Light is out for now! I bought a scanner today and used it to reset the codes. So far the SES light is out. Will see if it remains off. Thanks for the advice. -
S
SES light on 99 DSII
Still on! Driving the truck has not reset the SES light. What needs to be done to reset the computer? Thanks. -
S
SES light on 99 DSII
Still on! I cleaned the MAF as described. The light is still on. Does it have to be reset or does the truck have to be driven or is there something else I might do? Thanks. -
S
SES light on 99 DSII
New Link worked Thanks again. I'll let you know how it turns out. -
S
SES light on 99 DSII
Link? Joey, Thanks for the quick reply and the link. I can't get the link to open but assume it is a diagram or picture of the MAF. Is the MAF the portion of tube with the connection bolted on it and with the plastic grid on the air filter side? If so do I need to disconnect the bolted... -
S
SES light on 99 DSII
The SES light came on yesterday. Advanced Auto read the codes and the following came up. PO734 -Gear 4 Ratio Incorrect an PO174 System Too Lean Bank 2 and PO171 System Too Lean Bank 1. In searching the forum it seems I should check the gas cap and the MAF sensor. Any other ideas? I need... -
S
Blinker trouble
Working again Thanks for the ideas. Turned out to be a relay. -
S
Blinker trouble
The turn signals on the drivers side of my 99 Disc II do not work. When I push the turn signal lever down I hear two quick clicks comings from the steering column. The blinkers do not work on the driver's side when I use the emergency flashers also. When I depress the flashers button I hear...
