C1A20-64

[CyberTiVo]

Getting fault C1A20-64; plenty of posts related to earlier models; anyone know which compressor the Disco5 uses, where it's located, air tube diagram or distro block location? Either a leak or compressor going bad, my guess is leak; would like to soap fittings or rebuild block before blindly replacing the compressor. Just need to know where to start looking; I'm sure it's all hidden

 

[remember5]

Not where I would have been looking. LOL...

 

[CyberTiVo]

Thanks, I did find it, right where you showed! It is an AMK model and it is single unit with the cover rivetted on; definitely not designed for self help; I drilled the cover off only to find another box riveted also; there is a plastic elbow that looks like it could be a small dryer that's cracked, labeled DA4053 11505; the Google knows nothing about it; going to plastic weld the crack when it can sit for a couple of days to fully cure; I'll report back

 

[CyberTiVo]

Once I got it out, I noticed AMK 110366 & PA66-GF30 stamped in the plastic; the latter seems like the type of material and Google knows nothing of, what looks like, the part number. Based on other markings on the assembly the above is correct.