Cruise control - 2000 Disco II

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bgbrown125

Member
Joined
Jul 9, 2007
Posts
15
Reaction score
0
Engine light & Cruise issues on 2000 Disco II

Greetings All,
I recently purchased a 2000 Disco II.
Recently the SES light came on - will have that checked this week at local AZone.
My cruise does not work - dash button lights up, but it does not engage. ANY IDEAS ON A FIX?????
I'll be chaging rotors & pads this weekend - all 4 wheels.

How do you reset SES light???


Thanks in advance.
Barry
 
Last edited:

98GRDisco

Full Access Member
Joined
Mar 20, 2006
Posts
106
Reaction score
0
for the cruise check the hoses the hose on my 98 was cracked and loosing vacuum, I just did my brakes a few weeks ago and the front calipers were quad piston and the rear were duel piston so be ready. But it was not hard to replace but I should of replaced the rotors or turned them now there is noise come from them.
 

bgbrown125

Member
Joined
Jul 9, 2007
Posts
15
Reaction score
0
Engine Light Codes

Thanks for the response on the cruise.

I had the Service Engine Light codes read today on my 2000 Disco II.
P0455 EVAP Emission Control System - Leak (Large) / Checked gas cap....Any ideas on what else to check??????
P0420 Catalyst Efficiency below threshold - Bank 1 (Tune-Up ?????)
Any guidance would be appreciated.
 

98GRDisco

Full Access Member
Joined
Mar 20, 2006
Posts
106
Reaction score
0
I would just check all vacuum, second one may be an O2 sensor
 

98GRDisco

Full Access Member
Joined
Mar 20, 2006
Posts
106
Reaction score
0
Bank 1 is usually before the cat. but I don't know which side.
 

joey

Custom Rover Accessories
Staff member
Joined
Jun 28, 2004
Posts
10,473
Reaction score
181
Bank one is drivers side...

Sounds more like the MAF sensor needs a good cleaning...

Cruise is probably a vacuum leak
 

Latest posts

Members online

Forum statistics

Threads
36,268
Posts
218,063
Members
30,497
Latest member
TeriM
Top