Hello everyone, I have been reading a lot of the threads here and getting some good information. I recently bought a 1994 Range Rover County LWB. Needs lots of work, I have been trying to figure out how to get the ABS light to go off, Now I cant get it to even start. sounds like it's not getting any fuel. It had been running fine. Im thinking "Fuel Pump Relay". If anyone has any ideas please let me know. Thanks....Joe
New to me, 1994 RR LWB HELP!!!
- Thread starter jccallis
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
- Joined
- Jun 28, 2004
- Posts
- 10,519
- Reaction score
- 199
Welcome to the forum.
ABS light could be either an abs sensor or other issues... normally a bad ABS sensor or dirty sensor
Not starting... with it start with a little ether? If so, it is a fuel issue.
Download the RAVE (in my signature) if you don't already have it.
ABS light could be either an abs sensor or other issues... normally a bad ABS sensor or dirty sensor
Not starting... with it start with a little ether? If so, it is a fuel issue.
Download the RAVE (in my signature) if you don't already have it.
Thanks
Thanks, I havnt had a chance to check the sensors for the ABS yet but i did try the ether. didnt work. still trying all the small things first. let me know if you have any more suggestions. I have the big book and have been looking thru it.
Thanks, I havnt had a chance to check the sensors for the ABS yet but i did try the ether. didnt work. still trying all the small things first. let me know if you have any more suggestions. I have the big book and have been looking thru it.
- Joined
- Jun 28, 2004
- Posts
- 10,519
- Reaction score
- 199
If it didn't start with ether, then it isn't a fuel issue. Start with plugs/wire/distributor cap. I would also check the coil...
get r done!
Alright everyone, Im stoked! After a months of steady labor I got the LWB running. New rear half of the exhaust system, new brakes, plugs, wires, distributer cap, rotor button, coil, and a few other parts. Im not sure how i got it going though. it wouldnt start so i started reading some of the electronics troubleshooting and found out that if you break the alarm system the RR wont start. so I followed the directions on how to reset and what do you know. GET THE BIG BOOK!!! its a lifesaver. I never thought of the alarm shutting down the car. but it will. and the RR sounds awesome and runs awesome....today...
Alright everyone, Im stoked! After a months of steady labor I got the LWB running. New rear half of the exhaust system, new brakes, plugs, wires, distributer cap, rotor button, coil, and a few other parts. Im not sure how i got it going though. it wouldnt start so i started reading some of the electronics troubleshooting and found out that if you break the alarm system the RR wont start. so I followed the directions on how to reset and what do you know. GET THE BIG BOOK!!! its a lifesaver. I never thought of the alarm shutting down the car. but it will. and the RR sounds awesome and runs awesome....today...
