Parts identification - help needed

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

lrovy

Member
Joined
Sep 10, 2019
Posts
19
Reaction score
1
Location
France
Hi Guys,

Your help would be appreciated in identifying below parts - disclaimer - I did go through workshop manual and could not find enough info to be able to order what would be needed:
1. Where to attach this one (and if any other there on pics), what parts are needed?

0-02-05-bed36ca9e07d0da7c090d451441b820a40b9b06788efa0c1f692b006c21ea60f_1f9d788a8cb411.jpg
0-02-05-217196929046b2459246ea1a365a05a72de982175dabb0699cb3813fcb40815e_1f9d788a83721d.jpg




0-02-05-4edc6d479f03a68f8aa8d39d3a95d92e955a1a2fed4a0f639815d2088ed3abd7_1f9d788a8c8ab6.jpg



2. What is this? (sensor?) What's needed and where it should be attached? It is loose at the moment. It's on some sort of relatively hard tube though a bit flexible.



edited_20240221_174918.jpg
edited_20240221_174927.jpg





TBC - due to limits of attached files per single post.
 

lrovy

Member
Joined
Sep 10, 2019
Posts
19
Reaction score
1
Location
France
3. Just fixings missing - what are part number for these? Again, can't find it (just probably missing the keywords or something - did my search already and feel dumb that couldn't find it - hence help needed).
These two tubes are part of upper hoses and are on top of compressor. The black portion is air chamber
edited_20240221_172918.jpg
20240222_183438.jpg




4. Need to identify what this socket/plug was for, I'd like to replace it and get it fixed. Nothing is missing/disconnected or the mechanic did not connect it. It is behind right headlamp (headlamp removed on pics).
edited_20240221_172932.jpg
20240221_172950.jpg



5. Grill fixing points missing - this one already ordered and what came is too large and doesn't fit into the metal frame (this frame is from LR3!!! not LR4 post-lift - it shouldn't matter though maybe this is the little detail where it matters. Need to put LR4 post-lift grill there. The grill itself fits fine, just small rubber/plastic elements are missing so the grill would not rattle.).
edited_20240222_183445.jpg
 

alldazed

Well-Known Member
Joined
Mar 16, 2022
Posts
64
Reaction score
33
Location
ontario
Hi Guys,

Your help would be appreciated in identifying below parts - disclaimer - I did go through workshop manual and could not find enough info to be able to order what would be needed:
1. Where to attach this one (and if any other there on pics), what parts are needed?

View attachment 24381View attachment 24382



View attachment 24380


2. What is this? (sensor?) What's needed and where it should be attached? It is loose at the moment. It's on some sort of relatively hard tube though a bit flexible.



View attachment 24383View attachment 24384




TBC - due to limits of attached files per single post.
I think the red circled ones in the top of the engine bay are breathers for the diffs.
 

Latest posts

Members online

Forum statistics

Threads
36,260
Posts
218,017
Members
30,496
Latest member
washburn72
Top