Speed sensor

[T.O]

I can't find the speed sensor to replace on a landrover discovery 2 can any help

 

[joey]

What is the issue? Is it that the speedometer isn't working or something else?

 

[T.O]

not working

 

[joey]

Unless I am mistaken the D2 gets its speed from the transmission and from the ABS sensors... Not sure if the VSS works the same on the D2 as it would on the D1.

 

[T.O]

Is it on the D2 trans

 

[joey]

Let me check the Manual and double check.... I will try to post a response tonight.

 

[joey]

The VSS on a D2 is only used for overspeed and shifting points.

The SLABS ECU continually calculates vehicle speed using the wheel speed inputs from all four ABS sensors. The
calculated vehicle speed is then used as a reference against which individual wheel speeds are monitored for
unacceptable acceleration or deceleration. The ABS sensor inputs are also used by the SLABS ECU to detect vehicle
deceleration rate, vehicle cornering rate and rough terrain.

The Self Levelling and Anti-Lock Brake System (SLABS) ECU provides the signal input for the road speed. The signal
is at 8000 pulses per mile (1.6 kilometres).

The road speed information is derived from the SLABS ECU.