joey zingale
Active Member
- Joined
- Oct 12, 2009
- Posts
- 31
- Reaction score
- 0
I have a 97 discovery automatic with 105K on it.
I was having problems not being able to select high or low on the transfer case.
I can move the shifter right to left no problem but can not move it back an forth.
the linkage that runs stright up and down seems to move just fine. the linkage that runs diagonaly towards the rear of the vehicle dose no seem to be moving.
i have the inside of the car all torn apart, and stumped. can select high/low
any ideas?
thanks for any and all help
I was having problems not being able to select high or low on the transfer case.
I can move the shifter right to left no problem but can not move it back an forth.
the linkage that runs stright up and down seems to move just fine. the linkage that runs diagonaly towards the rear of the vehicle dose no seem to be moving.
i have the inside of the car all torn apart, and stumped. can select high/low
any ideas?
thanks for any and all help
