Search results
-
C
Anyone have a IIDTool BT G3 that they want to sell?
I know on the site you're able to transfer ownership so wondering if anyone has the tool and maybe wants to part with it for less than retail? My LR4 is getting up there in age, and trying to justify the tool cost. Thanks! -
C
Keeping radio on long term
Is there a way to keep the radio on the LR4 without the engine being on for say a couple hours? It's a pretty unique use case, but I've been doing to a drive-in with my car and it tends to time out after 30 min or so, which is a bit annoying. I can't imagine there's that much drain with just the... -
C
LED Headlight sourcing for 2012 LR4
I was going to go with Phillips as they're a known brand and seem well made, but they're also mucho $$$. I replaced the main headlight with ones from precisionLED which are working fine, but they're a bit bulky. Suggestions? -
C
Best way to clean out sunroof drains
I've heard that some shops will blow them out from the bottom, I've also seen people blow them out from the top or thread some weedwacker cord down the drain tube. I've also heard these tubes can collapse? Mine seem to have gone from sort of bad, to overflowing on pretty much any rain. Headliner... -
C
Mudflaps to catch rocks
Nice hack :) Did you have to drill new holes to mount these? I'm running the exact same tires. Cooper LTZ -
C
Mudflaps to catch rocks
I've been towing an Airstream for about 6 months and it's been a ton of fun...other than the fact it gets dinged every 1500 miles or so by some tiny rock. I have Cooper LTZs on the LR4 which are awesome but love picking up the stray pebble or 4. Anyone have a good recommendation on a way to tame... -
C
Drain hose exit
Does anyone have a photo of where the sunroof drain hoses exit on an LR4? I found some for LR3, but not sure they’re the same. I want to blow them out from the bottom to clear them. I’ve been told there are 4 of them, 2 front 2 rear. -
C
Repair and Preventative Question
Ya I’ve read about the PB Blaster stuff…seems promising. I’ve used other PB blaster products for years on my older bikes. When you’re putting on the coating if there’s already rust do you just go over it? -
C
Repair and Preventative Question
Someone decided to hit my taillight with who knows what in NYC the other day so I have a crack in my left rear light. Wondering if it’s something I should replace or just leave as is. Seems mainly cosmetic, but wondering if water intrusion will mess with the electrical system at all. Also are... -
C
Best rack for LR4 without factory rails
Looks interesting for sure, but seems they're out of stock. Did you ever try the wind deflector on the FRO? -
C
Best rack for LR4 without factory rails
In speaking with FRO, it seems like the rack has it's own proprietary setup though? Would you be able to mount other companies kayak racks, etc in the way you've described? What do you mount personally on it? -
C
Best rack for LR4 without factory rails
I’m looking for a rack to carry some gear (surf and paddle boards, maybe bike) but eventually also mount a rooftop tent to…likely a Baroud. I have a friend that did this with a FrontRunner, but before I plunk down on that, wondering if there are any better setups I might not be aware of? Any... -
C
Control Arm bushing repair NYC area
Hey all. I recently drove across the country from CA to NYC and it's time to redo my lovely control arms again. I replaced the whole arm and bushing about 2-3 years ago, but I know they're a weaker spot on the car. My mechanic in CA is the best and I've yet to find a shop as knowledgeable about... -
C
2012 LR4 Bluetooth Audio skipping
I seem to have some relatively frequent bluetooth issues with skipping audio when playing from my phone on my LR. This also seems to happen more on an iPhone than an Android Pixel I have. Has anyone had experience with this? I was wondering if it's an antenna issue or maybe firmware? -
C
Best repair shop in Bay Area for Rovers
Anyone have any preferred shops? I recently drove across and need a new "go to" I've been to Roverland / Euroland 4x4 and they seemed ok, but just figured I'd ask about others. I've heard of 11th street and English and European. Thanks! -
C
Front end lower than backend
I recently noticed that the front end of my LR4 is lower than the rear. I measured and it looks like it's about an inch lower in the front. Is this normal? I'm on brand new tires all of the same size. Maybe the air suspension in the front needs calibration? Thanks! -
C
All Terrain tires for 20s
I need a new set for my 20s....currently they are on stock Pirellis. Will mostly be in CA, and then probably NYC / Upstate. Was looking at the G2s, but have been seeing chatter about Cooper Zeons as well. I'm going to do a decent amount of highway driving so would like something aggressive, but... -
C
Keeping Audio on without Engine running
I've read a few things about this topic, but I was wondering if there was a workaround for this? I know some cars with push button you can hold the button down for 5-10 seconds without the brake depressed and it will go into service mode so the radio, etc doesn't shut down after 10 mins. I've... -
C
Ceramic front pads for LR4
Anyone have ceramic on their front? I have Akebono on the rear, but apparently they don't make them for the front :( Trying to find good ceramic for the fronts. -
C
LR4 Black Front Grille
I've been debating a blacked out front grille for my 2012. I have genuine black side vents that I've already put on. The main issue is that any genuine black front grille I find is pretty pricey. So I'm wondering if powdercoating the grille I have would be a better / cheaper idea. Has anyone... -
C
Showoff Your LR4
Out of curiosity...why the 285 Nittos vs the 265? Stock being 255. I've been thinking of picking up a pair this year, but I was expecting to get the 265's...unless there's a reason 285 is better :) -
C
Font control arm bushings?
Hey all. I picked up a 2012 LR4 in CA mid-August of this year. It's a CPO as well...so it was apparently checked over. I had a little issue with the parking brake that I brought it into the shop for. When they got it up on the lift, they told me that the control arm bushings were worn...
