Cross bars STUCK!!!!!

[prodriguezsas]

I am trying to remove the cross bars from my LR3, I was able to remove one, but the other one is stuck. I was able to slide it to the opening on the rails where the other one came off but this one it too tight!

They are OEM (black) and I am taking them off to sell!

 

[Dave Legacy]

PB Blast it!

 

[prodriguezsas]

Pb??????

 

[ryan-in-oregon]

The rails are not parrallel to each other. Once unlocked you need to loosen the allen screws on the top where the bar meets the attachment post. I sold my stock bars some time ago so I can't remember exactly what you have to do to access them but you can look on the topix site for the Accessory instructions which show you how to do it...

 

[toddjb122]

The rails are not parrallel to each other. Once unlocked you need to loosen the allen screws on the top where the bar meets the attachment post. I sold my stock bars some time ago so I can't remember exactly what you have to do to access them but you can look on the topix site for the Accessory instructions which show you how to do it...

100% correct. Just look at the top when you have the lock latch open and you'll see a little place for the allen wrench. It's an easy fix!

 

[prodriguezsas]

they are off!!!!

THANKS!