Pcv loaction

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

richterjustin08

Full Access Member
Joined
Jul 1, 2012
Posts
128
Reaction score
0
I have a 98 disco. With 177 k miles on it... I put a new breather five on from the throttle to the valve cover... Since I put a new one on, we think its getting to much pressure now and for about 60 Yards down the road it started smokeong down road white and then stopped... But need to find location of pcv valve... I do have the shop race manual.. if so what page??
 

Disco Mike

Full Access Member
Joined
Jun 20, 2009
Posts
1,949
Reaction score
4
Rovers don't have PCV valves but do have oil seperators located in the neck of the hose plugged into the right valve cover which can be cleaned or replaced.
Why do you think you have too much pressure, at your mileage, you may have too much blow by also.
 

richterjustin08

Full Access Member
Joined
Jul 1, 2012
Posts
128
Reaction score
0
Come to find out mike the head gasket is blown, what it is , is that she responds right away on the temperature gauge, and thermostat has been changed... When u start it pressure builds up right away for the coolant reservoir and keeps shooting.g out... So going to rip top end of motor off and put new head gaskets, and hopefully the heads are still good so I can just get them reshaved..
 

Disco Mike

Full Access Member
Joined
Jun 20, 2009
Posts
1,949
Reaction score
4
With your mileage plan on a full valve job while inspecting the rocker shaft and arms for wear. I would go a step further and inspect the cam lobes and lifter surfaces for wear.
 

Latest posts

Members online

No members online now.

Forum statistics

Threads
36,720
Posts
222,749
Members
30,890
Latest member
Besi
Top