Silly windshield wiper question.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

cmb6s

Full Access Member
Joined
Sep 3, 2013
Posts
152
Reaction score
1
I would assume that the LR4 wiper arms will fit without issue considering the newest part numbers for the wiper arms are LR038124 and LR038120 and are listed as being for both the LR3 and LR4.
 

catman

Full Access Member
Joined
May 4, 2015
Posts
699
Reaction score
194
Location
The Relay Shack, Parts Unknown USA
Exactly! My original cowl has that dumb poochy gap in the middle.

Did you know that windscreen run-off, if too much, is designed to basically flow right into the cabin vent on the passenger side?

Oh yes, that is why I replaced it once and I siliconed it down to the windshield as well, but even with that it is still "pulling" up in that same poochy spot again after the hot summer.

No leaks, but you can see it wants to bulge. I assume it will not last forever and I will need to replace it yet again. I opted not to construct a barrier underneath as some have done, but in hindsight maybe I should have!

Thanks for the part numbers cmb6s!
 

Latest posts

Members online

No members online now.

Forum statistics

Threads
36,272
Posts
218,123
Members
30,498
Latest member
Dandavies9
Top