Tech stud info

[Zakman]

Does any one know what stud size is on the 2010 Land Rover Sport SE....1.50mm or 1.25mm thread pitch??? And.....What is the length of the stud from the mounting surface?

 

[joey]

Welcome to the forum... Tech question are best asked in the Tech Section... LR Sport? as in Range Rover Sport? if so I would suggest asking in the Range Rover section or even over at www.rangerovers.net

 

[Zakman]

Sorry about that. We're installing a set of aftermarket wheels on a 2010 LR3 Sport Supercharged and found no one had taken care of lug nuts. As it turns out, we were able to verify that the stud thread is still a 14 X 1.5 and while we didn't find the actual measurement, the studs are a little short for just regular acorn nuts. It turns out there are a couple companies that manufacture a special nut with a shoulder that protrudes into the thru-hole to gain 4-5 threads. Mods, feel free to move this where it will do the most good. Thanks for the reply!

 

[davidfkon]

2010 LR3 Sport Supercharged