underbody schematic

[j_lester]

Does anyone know where I can get a diagram of the bottom of the LR3? A stick pierced a plastic box underneath my vehicle, but I have no idea what is inside the case.

It is located underneath the seat directly behind the driver seat and is mounted to the outside of the frame. I checked, and the same case/box is not located on the opposite side of the vehicle.

Any help would be greatly appreciated.

Thanks

 

[nwoods]

That would be the Air Compressor that's housed in that box. Or the tank, they are both on that side. I think the compressor is farthest aft.

I have rock sliders that cover that tank specifically for that reason. More info here:
http://www.disco3.co.uk/forum/topic6221-30.html

 

[davez26]

Sorta triangle shaped? Compressor box. Does the suspension work?

How did you do that?

 

[j_lester]

My family was traveling down the interstate, when we came upon some wood and sticks, and didn't have the time or space to avoid the debris. The portion of the stick that penetrated the case was only 3/4 of an inch in diameter, and 5 inches long. Now there is a .75 inch punchure on the front of the case, but it is only .25-.5 inches deep.

This is frustrating since I have not even had a chance to take the vehicle offroad. The suspension works fine still (knock on wood), but I'm concerned with having any water working it's way inside the case.

Does anyone have a picture of the case that houses the air compressor? I just want to make sure I am talking about the same case. (I would provide a picture, but recently had my digital camera dissappear).

Thanks for the help