Recent content by Rich_98
-
R
How do you remove shifter knob?
Hi Guys, I want to replace the shifter light plate, since the film on mine is currently broken. I know how to take everything apart down to the plastic gear indicator, but I don't know how to take the shifter knob off or complete this part of the operation. And the CD manual I have doesn't... -
R
(More) Brake Problems.
Hey Guys, My machanic did a flush in November when he put my new brakes on. But there must have been a leak, or he didn't do something right, because there was plenty of room for new brake fluid a month or so back. Turns out there was just a lot of air in the system. Did a flush just for... -
R
(More) Brake Problems.
About two weeks ago I want to start the car, and there was no break pressure, unless pumped. Been driving around for a while with this problem, and I would like to have it fixed. The ABS fuse is already removed, so it's not a sensor issue. And the fluid resivor is full. (Although when it... -
R
Can someone with manual help out?
My bad, Gotta replace the whole driveshaft. (Did this morning) =) Happy Rovering! -
R
Can someone with manual help out?
Just got back from the machanic, front driveshaft ripped up the U-Joint+Yoke. Can someone with the manual help me out? I need to find all the parts from the end of the front driveshaft (The piece on the shaft, that connects to the U-Joint) to the Yoke. Part #'s or names would be... -
R
Transmission/Metal on Metal noises.
Hi Joey, Checked out the U Joints and everything seems secured and correctly in place. Put the truck on the lift again just to be sure and the noise definitly is coming from inside the transfer case. Went ahead and put in an order on a rebuilt 97 TC which I will attempt to replace next... -
R
Transmission/Metal on Metal noises.
Changed the Gear Box oil, forgot to check the U-Joints - Gear box oil change (Although needed) did not help at all in isolating the sound. -
R
Transmission/Metal on Metal noises.
Hi Joey, Actually, the rear brake issue is a bit more complex than that :) Both the Rotor and Pad are brand new. You think I got a 'bad' pad? (If such a thing exists?) As for the other solutions. I have access to a lift tommorow, i'll let you know. -
R
Transmission/Metal on Metal noises.
Hi Guys, Before I start this post, I want to give a quick note to those of you purchasing any items - for quality service head to expeditionexchange.com - I bought a bunch of stuff from them, didn't work 'just' right, went back and they helped me (free of charge) diagnose the problem. Great... -
R
Instrument Cluster isnt lit anymore when lights are on?
I had this problem on my 98, At the 3rd click, where all lights should be on (For night driving) force one more click out of it. It will feel like you are going to break it, but it will click one more time and then come to an even stiffer stop once you are as far as you can go. Hopefully... -
R
Metal rolling around by CDL, what broke?
I'm back, unfortunantly. After a weekend of some minor offroading, nothing major, a few days later I am now hearing metal rolling around when I'm driving. The sound is that of a penny in tin can that you shake in a circular motion. When it's slow you hear it roll off the sides, when I go... -
R
Selling/Trade XS Sport Wheels (5)
Nevermind, Check classifieds. -
R
Is this the Master Cylinder?
300 Points awarded to Joey :) You were correct, and just saved me a bunch of money on my machanic bill. (I prefer to roll without ABS anyway. Let me do my braking not the computer) In case of future use that the ABS needs to be re-enabled (When/If i sell the car) what are the steps to remedy... -
R
wheel adapters
Check out www.expeditionexchange.com, www.atlanticbritish.com or www.britishpacific.com. -
R
Is this the Master Cylinder?
Hi Everyone, I'm back. Anywayse. I was driving between the Bay Area and LA the other evening and went to pull off the road to stretch out when I found out my brakes had stopped working. After pumping them a few times I was able to get enough pressure in them to safely pull off the road for a...
