Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Just got hitch receiver and wiring harness, will I need to have ecu flashed in order to tow anything? 2006 LR3 HSE
Thanks
Sent from my SM-T377V using Tapatalk
There should be no software flash needed re the trailer wiring hookup, however LED trailer lights will cause odd blinking of the trailer lights as the system was designed for normal tungsten trailer bulbs.I just wasn't sure if there's a flash or update so that the suspension adjusts to trailer weight?
Sent from my SM-T377V using Tapatalk
My Wiring I had no problem a tall wiring it up as long as you have the Link wires which you can buy from Rimmer Bros. The link wires are needed to connect the Tow sockets to your cars wiring loom. Once that is done everything should workJust got hitch receiver and wiring harness, will I need to have ecu flashed in order to tow anything? 2006 LR3 HSE
Thanks
Sent from my SM-T377V using Tapatalk
You might next ask where you can get the "update" for your ODBII device.The dealerships were around $145 for the software update, I do not have an ODBII device so I am not sure if that is one of the parameters that can be changed with one of those devices. Sent from my SAMSUNG-SM-G900A using Tapatalk