P0366-00 Camshaft Position

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Big Harold

New Member
Joined
Jun 5, 2022
Posts
2
Reaction score
0
Location
Australia
Hi All,
I have just done the timing chains on my 2011 RR Sport. All chains, sprockets, variators and tensioners replaced now I have a
P0366-00 Camshaft position sensor B circuit range/ performance (Bank 1)
I watch the scan tool and the desired camshaft angle at idle is between -9.5 deg and +9.5 deg I am seeing 11 to 13 deg.
It only seems to do this when it is cold when hot I haven't noticed the code come back.
 

ernesto101

New Member
Joined
Sep 16, 2022
Posts
1
Reaction score
0
Location
Winnipeg
Hi All,
I have just done the timing chains on my 2011 RR Sport. All chains, sprockets, variators and tensioners replaced now I have a
P0366-00 Camshaft position sensor B circuit range/ performance (Bank 1)
I watch the scan tool and the desired camshaft angle at idle is between -9.5 deg and +9.5 deg I am seeing 11 to 13 deg.
It only seems to do this when it is cold when hot I haven't noticed the code come back.
Hi I'm new to the range rovers but had this exact thing happen to me. just wanted to know what you did to get it solved? i have a 2010 RR sport 5.0 S/C purchased with the timing slack due to worn guides issue. replaced (chains, guides, variators, tensioners, gears)car runs smooth. P0366-00is the only code that still comes up and it comes up as 2 codes....once you clear it it won't return on that drive cycle. until new drive cycle begins itll come up. I already replaced the camshaft sensor bank 1 on the exhaust side, no change. would like to know what you did if you figured it out?
 

Big Harold

New Member
Joined
Jun 5, 2022
Posts
2
Reaction score
0
Location
Australia
I checked my timing again and it is correct. So I have learned to live with it. I was told that the rotor plate on the variator can sometimes be in the wrong position from the factory but I haven't pulled mine apart again to check.
I might go back in one day.
Mark
 

Latest posts

Members online

Forum statistics

Threads
36,223
Posts
217,605
Members
30,474
Latest member
sawcut
Top