Recent content by stb616

  1. S

    Price opinions

    Thinking it's time upgrade my truck which means I'll probably sell my Disco, too. I'm confused on price. Some are stupid high and kbb, etc is insultingly low....I've seen parts trucks sell for what they say these are worth. What range is this thing worth? No known issues. 2001 SD w/...
  2. S

    Codes and no start

    I hate when searching and people don't follow up. We're going to officially say it was just a crank sensor that caused all the misfires and no start. All is well in Roverland for now.
  3. S

    Codes and no start

    No. It appears it was a $25 crank sensor.
  4. S

    Codes and no start

    If it's a frequent thing, put a spark tester on it. Or pull a plug wire when it's being moody and rule out a no spark issue. If you've always got spark, it's going to point you back to that pump.
  5. S

    Codes and no start

    I'm trying not to get my hopes up, but so far so good. No codes and starting fine. What's going on with yours?
  6. S

    Codes and no start

    I haven't driven it enough to call the crank sensor a success, however in 3 short trips the problem hasn't come back. I'l give it at least a few more days and report back. I'm hopeful, but not getting my hopes up. When I did the crank sensor, why would it have oil in the plug/connector...
  7. S

    Codes and no start

    I'm fixing my boat so my lift bay is taken with another annoying project. Hoping to get further into the Rover this weekend. No issue that I can tell with plugs/wires. I don't believe it is the MAF, but we'll clean it just for fun. The more I think about the random no start and all the...
  8. S

    Codes and no start

    2001 w/ 75k on it.
  9. S

    Codes and no start

    Sort of a long story, but I'll try to keep it short. Been going on for a while. (No, I haven't been driving it much) It feels like it running fine. I wouldn't notice any loss of power or rough running at any RPM. I took it to a decent shop, but no not Rover experts and we was stumped and...
  10. S

    Rotors - Who makes 'em cheap and good

    I don't know if I'd buy whatever is cheapest, unless you like replacing them all the time. There are some very cheap parts sold online, but they are cheap for a reason- they are junk. Go to www.rockauto.com and see if they have something that will fit your budget.
  11. S

    Sold my Rover- Misc 2000 DII stuff for sale

    It breaks my heart, but I sold my 2000 DII a while back and I have some extras for sale if any one is interested. I don't need any of this stuff and I don't want to mess around trying to sell it very long. That being said- I'm going to leave this open to offers. If you're reasonable and...
  12. S

    I tried everything on the seat switch

    It might take two people but get a voltmeter and see if the switch is sending any current to the motor. You'll have to find the wires for which direction you're using on the switch but some trial and error might show a current. I'd try it on the driver side when its working so you know you're...
  13. S

    little rubber hose DII

    The other day my wife informed me that there was small rubber tube hanging out behind the rear pas-side wheel. Its right below the fuel door and looks like it runs up that way but I can't tell where it goes. Its not the stiffer, molded one that goes from the filler neck to the gas tank. I...
  14. S

    Worried 2000 DII

    Ok, I got the oil changed. I did the compression test again and the #1 (cyl w/ the low reading last time) came back at about 151psi. The other cyls came back between 162-168psi. So, I guess I'm at least lessening the spread. Whats the most variance a healthy engine would have...
  15. S

    Brakes

    I have a brand new set of Mintex ( ??) pads front and rear. I bought them thinking I should be about due for a set but I'm still at about 75%. Next time around my guess I'll need rotors etc. They've been opened but never installed. I'd have to look what I paid for them, but if you're...

Latest posts

Members online

Forum statistics

Threads
36,253
Posts
217,933
Members
30,493
Latest member
A562NV
Top