Installing Roof Rails
- Thread starter JangoSW
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Thank for the help. I did the best I could clearing the holes. Ended up buying new M6 1.0-16mm bolts which are a hair shorter than the OEM. Worked well.
The OEMs are M6 1.0-20mm sized for anyone who needs to know.
Thanks
Sean
toddjb122
Full Access Member
- Joined
- Jan 9, 2006
- Posts
- 1,951
- Reaction score
- 267
JangoSW, I posted my experience and solution a while back. Hopefully this is useful to you or the next guy who needs to remove the rail plugs;
https://www.landroverworld.org/thre...astic-caps-securing-roof-ditch-molding.29200/
As far as getting those out. It's now a mess, but try my method above (even with a broken off plug) rather than drilling it out. When I did that (drilling) it made a mess of the hole, I still didn't get it all out, and I needed to retap the threads.
domdom
Active Member
- Joined
- Mar 3, 2016
- Posts
- 25
- Reaction score
- 0
Does anyone know where to find replacement bolts for the underside of the ditch?
