Search results
-
N
Changing ps pump and steering box
Why is it that 90% of the time when someone asks for information that the only reply is check the manual? The manual tells me nothing about where to obtain or what to use as the centralizing bolt. Are The majority of Land Rover do it your selfers lazy and so afraid they are going to give away... -
N
Changing ps pump and steering box
Thank you Disco Mike, however I actually have to go out and buy tools as my former room mate who had tools has moved out and I need to know what to buy. I should have been more specific. I realize there are tool kits but a lot of times they have things I will never use. I need to know the socket... -
N
Changing ps pump and steering box
160,000 and I am changing out the box because fluid pours out of the top of it, not from the hoses but from where it seals together. I would simply like to know what tools I need please. I am changing the pump because it is burned out. No offense but I would simply like my questions answered... -
N
Changing ps pump and steering box
I have a 2000 disco 2, and will be changing out the power steering pump and steering gear box. I have a video that shows the removal and installation of the pump, and it shows the tools but you can not tell what size the tools are and was wondering if someone could let me know exactly what size... -
N
Rocker covers
Yes, it is a petrol v8, 4.0 Bosch engine. I would greatly appreciate any help you may be able to give! Cheers! -
N
Power steering pump removal Disco II
I recently found a video on youtube that shows exactly how to get to and remove the power steering pump on a Discovery series II. Removal / Installation of Power Steering Pump Landrover Discovery Series II - YouTube Also there are free programs one can download that allows the download... -
N
Rocker covers
Thank you for letting me know. I am going to be replacing my wires with 8mm and figured while the intake plenum is off I might as well go ahead and swap out the covers and throw in new gaskets. I can pick up a pair of covers for about 70 dollars used that have all ready been cleaned up I would... -
N
4:11 gearing
Thank you for the information! I am a photographer in my spare time and can spend hours out in the woodlands and have access to places that I can drive my Disco, not to do hard core off-roading but to simply get myself from point a to point b to set up and photograph landscapes and wild animals... -
N
4:11 gearing
Eventually I will be adding a 2 inch suspension lift to my 2000 Disco II. The tires I plan on running are 265/75/16 and I will be using the cdl if needed once adding the linkage from a D1. However I have not messed around with gearing in any 4x4 I have ever owned and would like to know if I can... -
N
Rocker covers
The valve/rocker covers on my 2000 Disco II look like crap, they function but they are peeling on the outside. I can find new or used all day long, however I am curious as to aftermarket solutions if any that though physically may be the same, they look better. I do not want chrome or stainless... -
N
Hello one and all
I joined not too long ago though I have had my 00 Disco II since 2007. It has been the most reliable vehicle I have ever owned and other than fuel economy I find nothing wrong with it. My plans for the vehicle: I will be adding a 2 inch suspension lift but before doing so I will be...- NEPAROVER
- Thread
- Replies: 2
- Forum: Introduction
-
N
Blinking trailer light?
My rear turn signals work just fine, and a visual inspection outside the vehicle show they work fine. However when you turn on the right blinker there is also a blinking trailer on the dash next to the blinker but when you turn on the left turn signal it does not come on that side. It's always... -
N
Outer tie rod and alignment
Having it up on the rack it was checked and it can be replaced separately, at least on mine. It screws in to the end, so on mine it is 2 pieces, the 1 outer drivers side and the long rod connecting them with the attached one on the passenger side. On every exploded diagram I've looked at it... -
N
Outer tie rod and alignment
I am referring to the tie rod end, the piece at the end of the tie rod that screws out on each end. The part runs about 30-50 dollars depending on where you buy it from. This is the part I am referring to: http://www.dweltd.com/photos/QHA.QR2230S.jpg Would I simply be able to mark on... -
N
Outer tie rod and alignment
I am about to have the outer tie rod end replaced on the front wheel on the driver's side. I was told that afterwards I would need an alignment. I have read numerous articles from various forums about centering the steering wheel as well as doing an alignment oneself. I will be having other work...
